The Radavist

John spent last weekend in Santa Cruz catching up with friends, riding some tacky dirt and checking out the History of Mountain Bike Evolution Show at Santa Cruz Bicycles, put on by Doug Hatfield, Velo Cosmos with Team Old Soil. The show spanned the evolution of the mountain bike from the 1940s through the Syndicate Racing Team’s World Cup DH machines.

Below, John hones in on the evolution of cruiser bikes to klunkers and the genesis of the Marin County “Mountain Bike” and shares a jam-packed gallery of bikes and hangs…

John and Tasshi from The Vintage MTB Workshop once again team up to deliver a Vintage Bicycles article. This time, featuring a 1975 Ritchey track bike. Read on for John’s photos accompanying Tasshi’s words…

Wende Cragg’s contributions to cycling and her documentation of the sport over the years are unquantifiable. And here at The Radavist, we’ve been fortunate to have her sharing snapshots of that history, from her moving piece about the origins of mountain biking, to her return to Crested Butte last year for the Pearl Pass Tour after a forty-two-year hiatus.

Wende is back today to share another special story we think you’ll thoroughly enjoy. This time, Wende pens an ode to her custom 1983 Breezer Series III built for her after multiple ill-fitting predecessors (including one of the ten original Breezer Series I). To top it off, she enlisted Joe Breeze to share a few insights about her one-of-a-kind bike and the general evolution of early Breezers. Let’s get right to it below!

You’ll never know who you’ll meet while on the road, and sometimes, the characters floating around campsites within our National Forests are as colorful as the natural surroundings. While John and Cari were cashing in on some long overdue R&R last week in the mountains of New Mexico, they met a fella with a Ritchey Annapurna and quite the story to tell…

There aren’t many modern bicycle brands that have a history quite as rich as Yeti, let alone a diehard cult following of collectors and fans for the early bikes. Coming into a steel F.R.O or Yeti Ultimate is usually enough to be considered a “Holy Grail” find for most. However, there is another bike in the early Yeti lineup that is so rare many will never see one in person and more modern followers of the brand may not know even exists. This is the story of an elusive Yeti Tree Frog…

Forever tinkering with his bikes, John recently wrapped up a complete restoration of the 1983 Ritchey Everest that we looked at last year. Remember? The gray one? The bike appeared to have been subjected to a sloppy respray at some point in the early 2000s, and John wanted to restore the bike to its formal glory. 

He pinged Rick at D&D, the guy who has painted more Ritchey frames than perhaps anyone, to respray the Everest in Imron Bright Gold paint with the uber-rare Palo Alto Ritchey decals to finish the look. The Everest also had a “touring package” added when Tom built the frame in 1983. Since John acquired it, the Everest has always felt a bit naked without the proper racks…

We know John’s posted a lot of vintage projects over the past few years, but this might be the best yet! Let’s check it out below…

Nothing screams early-90s louder than a tension disc and a pile of anodized parts and the colorful World Champ, Greg Herbold. Of all the pro riders who made a name for themselves in the early 90s, few played as important a role in pushing new technology forward as Greg Herbold. Although best known for winning the inaugural UCI Downhill World Championship title in 1990, Herbold was already a celebrated champion having previously won the NORBA National Downhill title three-times…

We’ve looked back at the early works of Jeff Lindsay’s brand Mountain Goat before with John’s Whiskeytown Racer profile but today our focus is a wild creation from 1988; the Mountain Goat Dinoflage Deluxe. Writer Zap Espinoza shares the Mountain Goat origin story and an interview with Lindsay about his work at Mountain Goat—let’s get to it!

Today we’re elated to present to you a most unique bicycle; Otis Guy’s 1978 Breezer Series I, in all its period-correct glory. This one is a very special installment of our Vintage Bicycles series, so let’s get to it!

We’re running with an alternative format for this week’s Vintage Bicycles feature! It’s one we hope you enjoy as it was penned by the original owner of this stunning singlespeed WTB Phoenix, Jacquie Phelan. Jacquie was an early MTB pioneer in the Marin constituency and along with her racing accolades is, perhaps, most known for starting the Women’s Mountain Bike & Tea Society (WOMBATS). In her own words,  she hasn’t retired from racing and still loves to mix it up on two wheels. Read on for her retelling of how this bike faired at the 2008 Napa Single Speed World Championships (SSWC)…

Marin County was a bustling time for the early mountain bike scene from the late 70s and well into the 80s. Names like Tom Ritchey/Gary Fisher/Charlie Kelly at the MountainBikes store, and Joe Breeze, Charlie Cunningham, and Steve Potts psychically and physically shaping the future of the then-fledgling sport with their fire-road ripping designs, torches and tig welders.

We’ve reported on Cunningham and Potts’ involvement in Wilderness Trail Bikes (known widely as WTB) over the past few years along with Mark Slate. In 1983, Cunningham, Potts, and Mark Slate founded WTB, and the trio began developing components in Marin, leaning on both builder’s fondness for innovation and exquisitely unique craft. While Steve loved to shape tubes with brass fillets, focusing on the form regardless of weight, Charlie would tig aluminum and shave grams anywhere he could. The two made for a dynamic duo of constructeurs.

By the time 1985 rolled around, mountain bikes were a legitimate tour de force within the bike industry. Even though they gravitated towards completely different frame materials and processes, Cunningham and Potts were credited with crafting some of the most iconic bikes of the era and still found the time to collaborate and share ideas.

As with many of the influential characters and pivotal moments in the early days of the almighty mountain bike, collaboration was key, and sometimes, it took two talented individuals to make a single bike…

Before we jump in, let’s take a look back: This has been such a fun process to undertake over the course of the past nine months. For those who are just tuning in, I bought a frame from Martin, owner of Second Spin Cycles, last year after he had acquired a substantial Fat City Cycles collection. Among his lucky haul was this Yo Eddy! in the team lavender livery with rack mounts, a pump peg, and some frame damage.

While the bike was in Rick’s care at D&D for some repairs and a paint respray, I began collecting period-correct parts from various sources. After re-finishing some of them and getting the bike back, I just finished the build this week. Monday night was the maiden voyage of the new and improved Yo Eddy! and I took some glamour shots here in Santa Fe, so let’s check this beaut out below!

While in Marin for a few photoshoots, John swung by to see Mike at Black Mountain Cycles in Point Reyes Station. It had been several years (maybe you recall his Shop Visit post) since he’d been in the area and was long overdue for some catching up.

Mike is an industry veteran, having raced bikes and worked for various brands over the years before launching his own in-house brand of bikes under the banner of Black Mountain Cycles. We’ve featured several Black Mountain builds over the years and are big fans of what Mike designs. Mike owns several unique vintage bikes that have helped inform his own designs, yet the crème de la crème is his personal Cunningham road.

We pinged Mike to write about this rare machine, showcasing its origins and unique details found only on a Cunningham, so read on for more!

The MCR Descender was a bicycle ahead of its time. It was the first suspended mountain bike and dreamed up by Brian Skinner whose contributions to mountain biking would go on to span the entire sport. On the technology side, Skinner started with the Descender but later led development on innovations such as index shifting, trigger shifters, SPDs, Onza porcupines and Answer taperlites. His first passion in the sport of mountain biking was as a race promoter though, and it was from that passion that the other half of this bike’s name MCR — Mountain Cross Racing —was born.

A rare machine, this 1983 Mantis XCR tells the story of the then-nascent Southern California mountain bike scene. The movement that grew out of Marin would eventually bring radical and different ideas to mountain bike design the world over. In tandem with founding Mantis Bicycles in 1981, Richard Cunningham’s first production racing mountain bike would serve as a catalyst to the burgeoning mtb scene, and stand in contrast to more traditional Marin-born frame designs. For the next ten years he would relentlessly innovate, exploring geometry, materials and design along the way. Read on for more of Noah Gellner’s words with photos by Joey Schusler…

Next week, I’m loading up the Troopy and heading West to the Keyesville Classic. Every year, vintage mountain bike aficionados descend upon the Kern valley to race vintage bikes while the “real” race occurs. This vintage race is quite the spectacle, and if you’ve never seen it in person, you ought to check out Erik Hillard’s gallery he shot a few years ago for The Radavist.

At any rate, I just finished buttoning up my bike I’ll be bringing to Keyesville to ride and, yes, take part in the vintage race. Let’s check it out in detail below…