The Radavist

Big tires, short chainstays, double crankset, pick two. Normally. Then there’s the concept of a boost road bike, in which case, pick all three. I call it a concept because there’s a lot that has to go into making a boost road bike a reality. To go from 142mm rear spacing to 148mm rear you’ve got to move things outboard a bit. I’ve seen a number of cobbled together solutions for this, which usually revolve around adopting a complete MTB drivetrain from the bottom bracket spindle, to the cranks, cassette, and chainline. But what about a road bike? Or a chubby road bike? That’s where it gets interesting.

Perhaps you recall Thomson making bikes with Lynskey a few years back? Those US made frames were a unique move for the component manufacturer and even though they didn’t sell a ton of the collaboration bikes, it set a precedent for the brand, prompting this project. Yesterday, I met Mike from Thomson, who was in town en route to NAHBS in Sacramento. Mike was unpacking and building up this flashy titanium bike when I saw the Thomson logo on the downtube. While it looks like a polished, finished product, this frame is, in fact, a working prototype. Not the first Thomson bike, but one of the first bikes Thomson has developed to be made overseas in Taiwan.

At the end of most trips, I end up with left-over photos or photos that don’t have a home in any one specific gallery. Yet, while in Tucson, I found myself carrying a camera and shooting photos on just about every ride, resulting in some pretty stout photographic documentation of a handful of rides. Without diving deep into the history or the meaning, I decided to simply present these routes with ample photographic documentation.

After spending close to a month in Tucson, I got a good handle on what the cycling community is like in that wonderful city. Well, in the winter anyway, summer is another story. One place I found myself stopping by frequently for events is Transit Cycles. With Spencer’s gallery being one of my favorite Shop Visits on this site, I didn’t feel it necessary to completely revisit Transit, photographically. While they did move to a new location since Spencer’s piece, many of the vignettes and textures are still relevant to Transit’s modus operandi. I did, however, feel compelled to check out their new space and hit some highlights, and as the title implies, to shoot the owner, Duncan’s, Black Cat All Road.

There were a lot of practical and well thought out bikes at this year’s Super Stoke Weekend and if time had allowed – short days and long ride agendas always make it hard – I would have shot them all. My methodology was to try to capture some of the themes present in the stable of steeds. With Gideon’s bike, I was able to shoot a 333 Fab. One of four present at the ride. With Spencer’s bike, it was about a similar approach to frame design but from an overseas production perspective. Black Mountain Cycles is a shop in Point Reyes Station, California. Mike Valey who owns the shop designs bikes for the brand after he spent years designing bikes for other companies in the industry. He and Sean from Soulcraft worked on this frame, dubbed the MCD, or Monster Cross Disc, with specially-designed dropouts for the thru-axles. While this bike is a departure from the traditional monster cross ideologies (700x45mm ish wheels with wide dirt drops,) it gets the point across and thrives off the ambiguity of mainstream monster cross definitions.

I was amazed at the number of 333 Fab bikes rolling at this year’s Super Stoke Weekend. One of which was this limited edition, Kyler Martz-designed, Now You’re Finished-painted, AirLandSea all-road/light tourer, piloted by Gideon Tsang from Austin. Morgan Taylor reviewed one for the site last year. Max from 333 Fab designed these bikes as a “Cascadian Rambler,” meant to take on all day or multi-day dirt road rides throughout the Pacific Northwest and beyond.

These bikes are made in a limited production run, with various sizing to ensure the rider can get their custom fit dialed in. You can choose from one of seven sizes, with the ability to fit riders ranging from 5’ – 6’5”. The sizing doesn’t stop at the geometry alone, Each individual size has its own specific tubeset with engineered tube diameters to ensure a proper ride quality. How they build up the frames is up to them! I particularly took to Gideon’s build spec, as it’d be close to how I’d build one of these up myself.

A few years ago, the disparity between road bikes, disc road bikes, and all-road bikes was very high. It was hard to find a disc road bike or all-road that had hydraulic brakes, clearance for 42mm tires, and extra bottle bosses for under $3,000. In the last year, the amount of all-road models on the market has increased drastically, which is great for the consumer! Bigger brands who typically address racing have looked to expand into all-road, gravel, and adventure platforms. Even Cannondale has thrown their hat in the ring with the affordable Topstone. I can’t help but think about how a bike like this would have blown the market apart a few years ago but how does it stack up against the already hefty list of options out there?

Plante Cycles is a small framebuilding operation in Rancho Cucamonga. Stephen Plante builds each frame in his home garage, at the base of the San Gabriel mountains, where he tests out the designs for each model. At the Cub House’s Bike Show and Swap this year, Stephen brought two bikes, one of which I’ve been meaning to shoot photos of.

2018 Philly Bike Expo: Engin Cycles All Road Rocket
Photos and words by Jarrod Bunk

Drew over at Engin is a bit of a problem solver, he also happens to be a machinist as well as a frame builder creating solutions such as a 5bolt CNC Spider allows for easy access to ring swaps that the stock configuration didn’t allow, a CNC two-piece yoke that is welded together to add clearance for both 700x47c tires and a 34/50 double crank, even though this bike is built as a 1x.  

The left shifter is converted to actuate the dropper post, something that Engin thinks is going to be the next big thing to bridge the gap between an all-road bike and the MTB.  With a build of Whisky Parts Co No9 rims and fork, White Industries hubs, and a full SRAM Force 1x kit, this bike surely blurs the lines of a fast road bike that still rips off road.

____

Follow Jarrod on Instagram, and Engin Cycles  on Instagram

Man! What a year for the Town Hall bikes at Grinduro. There were nine bikes from builders on display, all the result of their ideal Grinduro rigs, and many of the brands took it as an opportunity to release some balleur builds. Take for instance this Breadwinner Cycles B Road, blinged out with custom Andrew the Maker bags made from Burberry fabric.

The result is one of my favorite Breadwinners to date, especially when you look at the complete build from a distance. It has panache!

E D D Y M E R K I N!

____

Follow Breadwinner Cycles on Instagram and Grinduro on Instagram.