The Radavist

For framebuilders, there’s no better test for their product than a long bike tour. When I last saw Brian, he had just completed the Baja Divide on a bike he built. At the time, he had just left the outdoor industry and hoped to transition into building frames full-time under the Rare Earth Cycle Craft banner.

His hardtail was one of my favorite bikes I documented this year until I saw his Tour Divide bike…

Back in late 2018, I took delivery of a quirky steel full-suspension bike to review from a small framebuilding operation in the UK called Starling Cycles. Over the course of a few months, I rode the shit out of it in Los Angeles, where I was living at the time, and couldn’t get enough of it. As someone who lives metal bikes and loves riding trails, I hadn’t fully migrated to a full suspension chassis because I didn’t like the way the widely-available carbon models rode. The Murmur changed that for me. I reviewed the Murmur in April 2019 and immediately bought a V2 Murmur. 

Now living in Santa Fe, with arguably more technical terrain, I haven’t been able to put down the Starling Cycles Murmur; taking it high into the Sangre Mountains and beyond, this steel full-suspension bike really changed my perspective on the potential ride quality of full-suspension mountain bikes. Late last year, Joe from Starling reached out, saying he had a V3 frame for me to test out, and once again, I’ve been reaching for it nonstop.

Let’s look at my thoughts on the small changes the V3 underwent, leading to large improvements, and a broader perspective on steel full-suspension bikes below…

The North South Colorado Race kicked off Friday morning at 6am with about 60 riders taking the start at the grand depart from Lee Martinez Park near Old Town Fort Collins. Continue reading for an overview of this exciting event, along with a few insights from the field’s progress thus far.

It’s always great to get a chance to cross paths with internet acquaintances on the road and there are very few places like the Boyacá region of Colombia that enable that, thanks to Dean and Dang’s classic “Oh Boyacá!” route. I was heading north along the track while most are aimed southbound, which found me crossing with long and short-distance tourers on a daily basis while grinding up these infamous Colombian mountain passes. I spent some miles with two UK riders and, of course, we talked gear. Read on for a recap of our overnighter around the El Cocuy National Park and a closer look at Joe’s Mason Cycles RAW Andean Tourer.

SCOR has been a bit of an enigma ever since they emerged in 2021 as a more aggressive offshoot of BMC. So far, they make just one bike in two travel configurations, plus an e-MTB and a couple of kids’ hardtails. It’s a short lineup, even for a brand this new and niche. But there’s something about the clean, understated design and techy VPP-style linkage that makes it seem like SCOR must be destined for greater things. So, Travis Engel brought in the trail-focused 4060 ST to find out whether its beauty is only skin-deep.

Todd, from Black Cat Bicycles, has long been a favorite framebuilder of mine. A while back I did an Inside/Out Shop Visit with him in his home shop out of Aptos, California, and showcased a few of his bikes. I’ve also reviewed one of his Thunder Monkey hardtails. Something about his fillet-brazed and hand-carved lugged creations always resonated with me, even though I am usually attracted to tig-welded, more utilitarian “off-road” bikes. Truth be told: I’ve long wanted a Black Cat but wasn’t sure what to ask Todd to build for me.

Then it happened. As I was catching up with him at the 2022 Chris King Guest House event, I couldn’t stop drooling over the Swami 29er he had on display, so much so that I put a deposit down for one shortly after. So why buy a rigid mountain bike? I actually love riding rigid bikes on the same trails I ride my hardtails and full suspension bikes on. While I don’t take the same lines on my rigid bikes, I’m still relatively fast, or plenty fast enough, when descending a bike sans suspension.

For me, it’s all about being connected and honing skills. At this point, both reasons are tropes in bike reviews like this, right? Yet there’s something addicting to riding rigid bikes, and the Swami 29er has proven to be an incredible ally on our trails here in the Southern Rockies. Let’s check it out in detail below.

Meet Your Maker is an ongoing series of rides hosted by the Northern California bike-making community and finally returned to Skyline Wilderness Park in Napa, CA this past May after a nearly eight-year hiatus. Always excited to document cycling culture, Erik Mathy loaded up his touring bike and headed to the event from his home in the Bay Area with his usual eclectic mix of handmade cameras and lenses in tow. Below, Erik shares reflections on a few aspects of the memorable weekend that resonated with him, in addition to a series of interviews, a gallery of uber-creative analog portraits, and scenes from the event.

The first weekend of June saw another lap around the sun for the Handmade Bicycle Show Australia and while there was no blowing out of the candles, the show turned five this year. This edition was once again hosted in the incredible Seaworks building in Williamstown. Overlooking the city skyline, Melbourne looks close enough that you could touch it. Massive shipping vessels bring goods into the port, making a spectacular backdrop for a celebration of the craft and culture of the Handmade Bicycle. Andy White of FYXO share a gallery of beautiful bicycles and backstory about the builders at this beloved event.

Curiosity. It’s a great trait to have as a cycling journalist. An inquisitive nature is what first prompted me to throw a leg around subculture-spawned bikes, like steel full-suspension 29ers and titanium hardtails, years ago. Sometimes, you have to pedal something for an extended period to whet that appetite for the occasional oddity that arises. If you’re lucky, those experiences challenge your preconceptions, too.

Working in bike media, it’s pretty easy to get cynical about all the marketing hype and the constant push for model years by the bigger brands, particularly regarding ever-changing drivetrain technologies, incremental gains, and complex suspension designs. I still value riding a rigid 29er as much as riding a vintage 26″ wheeled steel chariot through compromising terrain: the almighty underbiking ride keeps you honest, allows for honing your skillset, and can be damn fun.

Yet, on the flip side, I am attracted to high-tech, modern carbon bikes in small doses. Hence the allure of this Yeti SB135.

Before testing out the SB135, it had been a while since I’d ridden a carbon full suspension as, in the intervening years, I’ve been enjoying sampling the steel offerings out there from smaller, bespoke builders. Yet, the appeal of the high-tech is palpable—lighter, faster, smoother-shifting sounds fun, right? Mix in Yeti’s 27.5″ platform for the SB135, and my curiosity was piqued. The last 27.5″ wheeled bike I reviewed was the Santa Cruz 5010 and the previous 27.5″ wheeled bike I’d ridden was the Transition Scout that was loaned to me for a Moab trip. It was on that very trip I realized that while I admired the 27.5″ wheel platform, it wasn’t necessarily for me nor for the terrain I enjoy riding.

Yet, the SB135 was just strange enough, foreign enough, new-and-techy enough to have me put my steel sled with cable-actuated shifting aside for a few weeks and spend some time riding Yeti Turq and SRAM T-Type shifting…