The Radavist

Rust Never Sleeps on Sofia’s AWOL Touring Bike
Words by Erik Nohlin, photos by John Watson

TRUST ME, I’M A DESIGNER

As a designer of bicycles I try to stay on top of things like material development, new alloys, paint pigment, flakes, pearls, platings and whatnot. It’s in my interest to stay updated in an ever-changing world. What you see on the floor in a bike shop is not just a bicycle with a random color: it’s the result of hundreds or thousands of hours of trial and error behind the scenes at any one man bike shop or huge bike brand with a fleet of designers.

That one color started out as 666 other potential colors and in the end, only one made it. For the one man operation or smaller brand in a well-defined niche it might be easier to do cool and crazy shit to please that one customer with that weird request of a thermochromatic dead matte black that fades to metallic peach with a pride parade pearl to top it off. I design bicycles for a global brand and need to create a bike that pleases a global rider and as you all know, trends and cultural differences around the globe vary, fluctuate and make my day pretty complicated.

I’ll be honest with you: it’s frustrating to rarely ever be able to bring the raddest and weirdest stuff to you. One example is the one off Full Nuke Rainbow AWOL I created for the Transcontinental Race, a bike that almost blew up the internet when John posted it. So much stoke and love was thrown on that bike but the reality is that it would be impossible to produce it, guarantee the surface quality, get a decent price and distribute it to you. Doing rad stuff is easy but mass producing it is a completely different story. So, I try a lot of surface treatments and materials but most often these tryouts, experiments never leave the design studio as more than dirt on my hands, stains on my jeans and once in a while, a painted one off bicycle that I can tell you about.

The Rust AWOL is my wife Sofia’s bike and it used to look quite different. A super glittery rainbow flakey touring bike that was left in the hands of Garrett Chow on a journey to the heart of Death Valley early last winter. The washboard and dirt in Death Valley eat bikes for breakfast and the beat up bike that was returned to her had a couple of scars too many so I promised to bring it back to its “old glory”. The frame is one of the first nickel plated frame samples for the Transcontinental Edition AWOL we did and a perfect canvas to be creative on since the nickel makes it completely sealed for corrosion – ironic isn’t it? Rust is corrosion and in this case impossible to achieve without some chemical magic from a UK paint company called Rustique.

My colleague Barry Gibb had previously used it to create a fantastic surface on a carbon bike and I wanted to try it to, on steel this time. We ordered some paint and decided that Sofia’s nickel plated bike would be the victim for this experiment. The month of June is usually pretty mellow at work (read: not as completely fucking crazy as July and August) and I spent some afternoons in the workshop and paint booth to finish off this creative experiment in an effort to bring real organic life back to a surface that’s dead. In a step by step series on Instagram, I told a transparent story about the process of the #rustawol and here it is and for the first time, a somewhat finished bike. The project was crowned with a Brooks Cambium rust saddle and bar tape where the fabric matches the bike and the vulcanized rubber matches the tan wall tires nicely.

As a last step I gave the Supernova headlamp and the Tubus rack a kiss of iron oxide. The humid and cold San Francisco summer will continue to corrode and oxidize the surface even though it’s been sealed with a clear coat as I surprisingly discovered after picking up the bike today. I learned a ton on this project, got my hands dirty and created a bike that Sofia really seems to like. I love that I sometimes can show you the hands-on process of being a designer at a big brand when 90% of my work never leaves the design studio. Confidentiality keeps us all from sharing what I know a lot of you like seeing and know more about.

Personally, the making-of-dvd in the Indiana Jones DVD box is far superior to the movies themselves and getting dirty is the only way to learn something new.

____

Follow Erik on Instagram.

Like many framebuilders, Rafi Ajl began his love for the bicycle at a young age but it wasn’t until after graduating from Harvard’s Graduate School of Design that he began pursuing his love for building bicycle frames. Ajl’s background is fine art and as such, his bicycles began functional art. Something you would not only love to look at, but would love to ride and would be able to do so for the rest of your life.

Perhaps it was Rafi’s passion for art, design and the bicycle that drew Geoff from Box Dog Bikes, a local, owner run co-op bicycle shop in the Mission of SF to Raphael Cycles’ work. Or maybe it was the proximity. Rafi Ajl is no longer making frames, but when he was, Raphael Cycles was literally blocks away from Box Dog Bikes.

Geoff wanted a classic touring bike with external routing, fender, rack mounts and a 1″ threaded headset. A seasoned tourer, randonnée, cyclocross racer, shredder of vintage mountain bikes and all-around capable cyclist, Geoff knew exactly what he wanted and has been thoroughly enjoying this bike. As evident by the years of use.

A SON hub powers the S3 lighting and a well-positioned and broken in Brooks saddle cushions and inviting a ride, so much that I pedaled this bike for an hour or so before finding the perfect spot to photograph it.

190 days. That’s over 6 months. For Doug D, that’s how long he’s been living in and on this bike: a custom Brooklyn Machine Works tourer. This frame is in fact the only custom bike the Brooklyn framebuilders have made over the years. Sure, there have been numerous prototypes and one-offs, but Doug’s touring bike is the only completely custom ride they’ve made.

For good reason. A touring bike like this weighs around 100 lbs and carries everything Doug needs to tour all over the east coast and northeast during the harsh winter months. It has specific engineering requirements and plenty of custom details.

It features custom-designed and laser cut dropouts, as well as an integrated cable sheath at the seat tube cluster. Doug specifically requested BMW’s signature double plate fork, with aero blades, specifically drawn to hold the weight of panniers. Then, to top it off, the decals are the first ever die-cut vinyl logos the brand has done.

All in all, it’s a rather straight forward build. Pieced together with whatever spare parts Doug had on him at the time. Take for instance the Dura Ace cranks and Ultegra front derailler. Yet the 48h Phil Wood touring wheels, Paul Touring Cantis, Brooks saddle, hand made front panniers and Arkel bar bag are very much touring specific.

So what’s Doug been doing for 6 months? He’s been visiting various factories and facilities where companies still make goods in the USA. Everything from Easton hockey sticks, to boot makers, military equipment, stand up paddle boards and yes, even bicycle frame builders.

I caught up with Doug briefly in Austin yesterday, shot his bike, took him to my favorite bar and heard stories about stealth camping, staying sane and most importantly, warm during the winter months. He has tons of film and digital photos, which he hopes to put into a book at some point.

Follow Doug on Instagram for more stories and photos. If you see this man on the road, say hello!

The stick that held up the bikes in this Gallery…

I shot a lot of bikes this year. In fact, I shot more Galleries this year, than any other two years combined. From April 1st’s launch of the Radavist, until last week, the entire team worked hard on bringing a full photo gallery just about every weekday, sometimes twice. Pulling in those metrics took some time, but rather than limiting this year’s selection to just ten, I found the following bikes to be all within the same realm.

Some of these bikes never dropped a chain in terms of year-long momentum, still churning in pageviews and social media chatter to this very day. Surprisingly to me, a few were completely stock bikes. These were all chosen for their Facebook likes, social media engagement, comments and overall traffic. I feel like there were a lot of bikes that were flops as far as traffic was concerned, but I wanted to be fair in selecting the list.

Before we get ahead of ourselves, let’s back up a bit.

We began the year with a few big stories, all leading up to one of the busiest weekends of the year, NAHBS. After record-breaking traffic, the world of Beautiful Bicycles culminated in the 2014 NAHBS Drive Side Gallery. From there, it was onto traveling for stories and documenting Beautiful Bicycles along the way… We’ll start off in Prescott, Arizona for the Whiskey Off Road.

In a lot of ways, my first Geekhouse Woodville touring bike served as a catalyst for me taking cycling more seriously. It was my first custom bike and provided me with ample motivation to just get out there and ride. The first major tour being Portland to SF and from there, I took it on numerous other trips here in Austin. When it was stolen last year, I began planning out a replacement with Geekhouse. There were some things I wanted to change, but mostly I just missed having a touring bike to ride around on.

As it sat en queue, I couldn’t decide on how I wanted it to function. Initially, I wanted a dirt-drop 29’r pack-bike tourer for riding the MTB trails here in town, but then my Independent Fabrication took over that role, so I revisited what I loved the most about my first touring bike. The riding position is what I would consider traditional but having acquired the Bruce Gordon Rock n Road tires, I wanted to make sure it would roll at least a 50c. I also opted for external cable routing and passed on the S&S couplers.

I’ve had great luck with the SRAM XO rear derailleur and its 11-36 range matched with a compact crank. This time I went with White Industries VBC system and a Force front derailleur, converted to a top-pull. With a 50 outer ring and 32, inner, I’ll have a wider range than I would with a triple. Chris King classic hub on the rear and a SON hub with matching Edelux lamp on the front for light.

Paul components throughout: Tall and Handsome post, Touring Cantis. Other components include a Thomson seat post collar, Brooks Swift saddle, Salsa Cowbell 2 with SRAM barcons, TRP levers and MKS Lambda pedals. With all the Made in the USA bling, I got Marty and Brad at Geekhouse to fabricate a one-off custom stem as well as front and rear racks. The beauty of the front racks lie in their low-rider detachable hangers on the front…

I always load front and low on trips. The bike rides a lot better since the handling isn’t compromised as it would with a rear load and these low-riders are low. My large panniers sit about 6″ off the ground, which is perfect on a 43c tire. On top of just looking amazing, these racks weighed a lot less than the Tubus system I had been using previously. The fork is another highlight: internal cable routing for the Edelux lamp and the segmented shoulders have rack attachments.

Even with all those details and that component list, a build can still go south with a bad powder job. Brad really knocked this one out of the park. Olive Drab green with a matte clear adds to the utilitarian / military aesthetic I wanted. I’ve been scooting around town a lot on this beaut and took it on a few trail rides last week and am in love. Even the ride out to shoot these photos was super dreamy…

I still need to dial it in though. The derailleur cables are now routed under the tape, mostly to make it easier to mount a Swift Industries Ozette randonneur bag. I’ll also need to splice some more chain so I can use the 50t with more of the cassette but for now, it’s riding really well.

That said, it’s not a touring bike until you’ve at least camped on it and summertime in Texas will provide ample opportunities. Right now, I’m just pumped that it came together so well. Many thanks to PAUL, Bens Cycle, Chris at Mellow Johnny’s and the Geekhouse crew for making yet another dream come true.

… also, buy renter’s insurance! Most plans will cover your bikes when they’re stolen!

I’ll admit. When I first saw Jon from Two Tone ATL‘s bike sitting in the Six Eleven booth at NAHBS, I didn’t know what to think. First, I looked at the bottom bracket, which looked like a drop track, then the angles were pretty damn close to parallel, with a cross fork rake and S&S couplers. Rando? Tourer? Cross? Travel, disc road with fender clearance? Honestly, it looked kinda like a track bike, too.

Initially, I was reminded of the Homer Car, which might seem like an insult but it’s not. One of the merits of a custom build is that no matter what you think you may want, a builder can and usually will make it. Jon’s a self-described “trackie”. He likes the feel of a track bike. Aggressive angles, nimble handling, higher bb and yes, Speedplay pedals. The seat tube and head tube angles float in around 73.5 degrees with a BB drop of 55mm (most cross bikes float around 65mm – 68mm) and 420mm chainstay.

If I had to categorize it as anything, it’d be a cross bike but it’s more than that. Maybe a “Rock and Road”, a la Bruce Gordon? Jon describes the bike as “versatile” and I feel like a lot of builders get requests for bikes like this. A jack of all trades, master of none. Mechanical discs, Chris King Iso Disc R45, ENVE tapered cross fork and yes, it has Retroshift, which I actually like on this bike. I always use barcons on my touring rigs and I can appreciate the simplicity and reliability of shifting with barcons.

Look, this is an odd duck. Not an ugly duckling, but a strange fowl. It is not a production bike, however, so don’t get your feathers in a ruff. For Jon, this is exactly what he wanted and I’m sure people are still going to insist that they know best here – read Bike Snob‘s commentary yesterday? Jon knew exactly what he wanted. He’s a well seasoned cyclist and this is his dream machine. Maybe one day you can chat about it with Jon on a ride but chances are, he’ll be waiting for you at the top of even the steepest climb (not joking, dude is a hoss).

This year, I traveled more than any year before, which allowed me to photograph Beautiful Bicycles from all over the world. When I began compiling this list, I wanted to pull in from my own personal favorites, meaning bikes that I remembered more than others. Ranking based on traffic and comments has been done before, making it too easy, so I started at the first posts this year and went through my favorites, narrowing it down to a sharp top 10 list. While many of these bikes are from the past few months, some of my favorites came in early on. A few are just iconic and others are classic, but they were all a blast to photograph.

See for yourself, in no particular order in the Gallery and notations are below.