The Radavist

We were catching our breath after the short climb from Warner Lake up to the top of Hazzard County. Burro Pass was a riot–we yipped and hollered the entire way down. After a quick sip of our drinks and admiring the view, we got back on the pedals and began the broad, fast winding trail down the open scrub of this famous section of The Whole Enchilada. Popping and jibbing, sliding, and tucking, we were fully in ‘the flow’…until…THWACK! I slowed down and found a spot to pull off and investigate the source of the racket. My wheels were true, the tires firm, fork and shock yet sprung, when the problem revealed itself: I had impacted a loose chunk of sandstone that penetrated the downtube on my carbon frame…

This year brought about the return of the Handmade Bicycle Show Australia, and we had our mate Andy White from FYXO on the ground documenting some of Australia’s finest handmade bikes. Part 02 of our coverage showcases 12 unique builds from the show, so read on for more!

I could hear the rain slow to a trickle on the metal roof as I peered toward the mountains from the window of the hospedaje I’d found refuge in the night before. I leaned way over to not smack my head on the door frame that couldn’t have stood higher than five feet.

The late 80s and well into the 90s marked a sea change in mountain bike design. Suddenly bikes that were designed to ride fire roads and trails with no real intention were being hurdled down mountains at breakneck speeds. Competition between the brands within the burgeoning sport was fierce, and the race to produce lightweight racing bikes had begun. Perhaps the most infamous of these experimentations is the Yeti C-26, and today, we have some juicy photos of Juli Furtado’s C-26 WC race machine with an entertaining account of this bike’s genesis by Mike Wilk…

To much fanfare, last month we teased the beautiful steel full suspension enduro rig that Tyler of BTCHN’ Bikes was cruising around with at Sea Otter in our event coverage. Aptly named The JERK, it’s a true stunner with a 29/27.5 mullet setup, standard 24mm bottom bracket single pivot, custom integrated bar/stem, wild paint, and so many other intricate details. Today we’re stoked to announce that BTCHN’ is launching a small batch pre-order for eight of these frames in a size run (S, M, L) and two suspension configurations. The engineering for this bike was complex and took Tyler and team a looong time to dial in. Below, Tyler goes into lavish detail about his design process and philosophy, so continue reading about this beautiful machine, how it came to fruition, and how you can get your hands on one!

There’s more to biking in Baja than the Divide

Twenty minutes after sunset and the sky has a glowing ember look. Night is taking over. In the distance — in the hills — you can see the front and rear lights of a bike. At first, it seems like it must be a motorcycle, but there’s no noise. It’s a mountain bike. The rider zooms up and down small climbs and descents, and then flies past us in a cloud of dust we can’t quite see, but can smell. The person on the bike, whoever they are, is having a great time.

I’m driving the entirety of Baja — with my husband and our dog — from Mexicali to Todos Santos. We started in Colorado. All in, the trip south is over 2,000 miles. We camp a lot — in a little van we built out last year. It’s great, but not quite van life. More, a step up from tent life. We’ve got our mountain bikes — an Ibis Mojo and a Revel Ranger — and a lot of peanut butter.

Los Angeles is home to one of the most diverse and eclectic cycling communities in the world. People from all walks of life have found that the bicycle is by far the best way to traverse this sprawling urban mass, nestled between the Pacific Ocean and the San Gabriel mountains. Catering to this community are a number of bike shops, but one of our favs is The Cub House, which over the years has played host to a number of fun events, most notably the bike and car shows! To up the ante this year, Sean, Carla, Danny, and the team at The Cub House hosted the LA Invitational, a Euro spin on the weekend which included big rides on Saturday and the bike and car show on Sunday. John and Josh made it out to the City of Angels to document the people, bikes, rides, and more, so check out a chubby gallery and some words from John below!

A boulder stops me in my tracks. There is a dry creek bed below, a huge boulder ahead, but no trail to be seen. I put my bike down and try to think logically. First I inch my way around the boulder to see whether the trail will somehow materialize. It doesn’t. I then walk as far to the left of the boulder (west) as I can, hoping I will find a way around. Nothing. I backtrack a ways to see if I missed a crucial turn. I didn’t.

The rock is an impenetrable vertical bridge. I’m suddenly repeating ‘YOU. SHALL. NOT. PASS!’ over and over in my head. Am I Gandalf or the Balrog in this situation? Or Frodo? Or an orc? Hard to say.

And there in my periphery goes that damned black animal again, wildly running away into the sandy night just past my vision. It’s roughly the shape of a boar but it runs like a gorilla. I’ve seen it a half-dozen times at this point, though, so nothing to be concerned about. It’s harmless.

It’s mile 335 of the Stagecoach 400, I’ve gone over 36 hours without sleep, and I’ve been stuck at the transition to The Willows for over 30 minutes.

SimWorks is pleased to present our latest offering in the Doppo lineup of framesets: The High Plains Drifter. These framesets are handcrafted in small batches by our friends, and adept framebuilding cohorts, at Simple Bicycle Co. here in Portland, OR. It’s a modern twist on a time-honored favorite, sure to bring back more than a few pleasant reminders of some of our earliest memories on a bike, while opening up a world of possibility for future off-road explorations.

Still reeling from the loss of my father in February of 2020, I was in the depths of grief and drowning in the weight of his absence when I decided to accept my friend Jalen’s offer to go bikepacking for the first time. In his youth, my father loved spending time moving across mountains, and since I loved being outside too, I felt like going on this bikepacking trip was less of a pure adventure (although adventure would ensue) and more of a way to honor him by doing something that he enjoyed when he was young. I felt like doing something productive with my grief, to move my body forward and look back on all our memories together while observing how much he shaped who I am. In his youth he rode through Mexico on horseback transporting cattle between ranches and, while I was pedaling my bike on this trip across the land, I often thought about similar experiences we might have shared. As I rode through the Kokopelli trail on my first bikepacking trip, I took in the scenery and imagined what my dad felt when he was in the Sierras of Mexico every time I stared off into mountains or observed the star-filled night sky. I envisioned him looking at similar things as if we were sharing a moment.

With ancient podocarp forest blanketing the trail beneath me, I stand, perched on the escarpment about halfway through the Paparoa Trail. The mountain wind forces tears from my eyes and between the momentary breaks in the cloud, I catch a glimpse into the deep channels of Pike River valley, which once held the Pike River Mine.

Ahead of me, the Arizona Trail snaked into the forest, disappearing behind the shadow of ponderosa pines, and re-emerging in a stretch of marsh lit by a sliver of moon. I dismounted my bike and plunged off a muddy bank onto a log submerged in stagnant water. After seven scorching days racing through southern Arizona, this riparian zone on the rugged southeast flank of the Colorado Plateau offered a reprieve from the harsh Sonoran desert, but without the constant pricks and jolts from agave, cholla, and cat’s claw to center on, my mind wandered where I didn’t want it to go.

It was November 2nd, or maybe 3rd, depending on whether or not the clock had struck midnight yet. I didn’t care. This time last year, I was deep in the relentless clutches of psychosis, and moving my body outside, no matter the time of day, made wrangling with grief and humiliation easier.

In October of 2021, I pulled my truck into Patagonia, Arizona for the very first time. I had no real agenda (other than ride bikes, take photos, and sample the local draft list), and no inkling how important this place would soon become in my story. Spotting the liveliest-looking spot in the 1-horse town center, I walked over and was promptly greeted by Heidi Rentz Ault – “Are you here for the Grand Opening?” She was talking about Patagonia Lumber Company, the new bar, music venue, and coffee house cooked up by her and her husband Zander Ault. The doors were due to open for the first time in 1 minute, and by pure luck I became customer number 1. The kind folks at the bar then pulled me an IPA from nearby Tombstone, Arizona.