The Radavist

It’s a damn shame. Yeah, it really is. It’s a shame that this bike sat in my storage room, with no drivetrain or brake parts for so long. After reviewing this Retrotec Funduro 27.5+ hardtail a few months back, I couldn’t send the frame back to Curtis. I just loved it so much. After some emailing, he agreed I could buy the frame, but I had to send the Shimano parts back to Retrotec HQ in Napa and buy him a new Chris King 40th group.

Months later, Chris King asked to have the bike for their 40th Anniversary show, so I cobbled together a partially working build with a new SRAM Eagle group and sent it to Portland for display purposes only. Partially working? Huh? You see, SRAM and Shimano do chainring offset very differently and SRAM’s Eagle ring isn’t available in 0mm offset, like their other drivetrain systems are and like Shimano’s XTR cranks are designed, so even though it looked damn fine with all that glistening gold on it, the chainring wouldn’t clear the stay…

We’re here in Southern Utah, soaking in all the red dirt we can and riding some of the area’s finest trails. While Kyle and I had a short drive to St. George, Parker and Josh from Minneapolis’ Angry Catfish had a staggering 24 hours of driving on icy, winter roads to reach our meet-up point. The boys finally showed up and Josh unpacked his Oddity Cycles 27.5+ hardtail.

Josh commissioned Sean from Oddity to build it up last year, where it was displayed at NAHBS and he’s had it on display at Angry Catfish ever since. He’s ridden it throughout Minneapolis’ trails but this is the first road trip this bike has seen and man, what a trip it’s been so far.

I love seeing show bikes being shredded, especially against such a wonderful backdrop.

I shoot a lot of road bikes and these days, it’s very rare you see one without a 44mm or tapered head tube. Whereas most people that want a steel frame with oversized tubes, Jaybe from Team Too Late wanted something more classic, something that would dance with him as he climbs and descend like a race bike from the 90’s. He spent a lot of time browsing NAHBS galleries, looking at various framebuilders and was attracted to the work of David Kirk, the Bozeman, Montana builder known for his impeccable fillet and lugged frames.

Jaybe didn’t want your typical, straight-tubed frame however. He requested curvy stays and the result is one of the most beautiful road frames I’ve ever photographed. Built with Chris King’s 40th-anniversary olive drab hubs and Campy Record 11, Jaybe’s David Kirk is sure to perform and look damn good while riding in the hills and mountains of Los Angeles.

David from Kirk Frameworks will be at the 2017 NAHBS in Salt Lake City, Utah and personally, I can’t wait to see what he brings with him.

We all have our favorite cyclists or teams from the 80’s and 90’s. For Sean of Team Dream Team, it was the early 90’s and Greg Lemond, specifically that slick Calfee-built Team Z bike. The red to yellow to blue tri-fade has long been a favorite of Sean’s and that became the precedent for this new Stinner Frameworks road bike.

Sean’s already got a race-fit road bike, but he wanted one with a bit more head tube, partially for a less aggressive fit, but also for longevity. He wants to be riding this bike for a long, long time, even after his flexibility has been reduced due to age. Mid-life crisis bike? Maybe, but I commend Sean looking at the long-term lifespan of this bike. It literally is all he could ever want in a road bike and more.

The bike was spec’d with Campagnolo Super Record 11, a NOS Flite saddle, with ENVE parts and Mavic Ksyrium R-SYS SLR wheels and built by the capable hands at Golden Saddle Cyclery. If you’re going to NAHBS, look for it there, and expect a photoshoot of this bike and the original Team Z Calfee in the near future.

Over the years, we’ve all really strived to make the content and the characters here on the Radavist unique. It’s been a slow process, but as I’ve just spent a week sifting through the site’s archives from 2016, I can honestly say this has been our best year yet. These year-end recaps are always a joy to collate, as it allows everyone here at the site, as well as the readers to look back and relive some our favorite moments.

2016 was busy. Very busy. In fact, the archives are almost twice as long as the previous year’s, which were almost twice as long as the year’s prior, making editing the site’s content into a digestible post challenging. We’ve omitted bicycle reviews and Beautiful Bicycles for obvious reasons, leaving only ride, travel and shop visit Reportage as the meat of the gallery and storyline. I hope you enjoy this as much as I did and I’d like to thank everyone for making this site, well, rad! That includes you, the readers and the commenters. I couldn’t ask for a better community.

Before things get too sappy, read on below for the Radavist’s 2016 Year in Review.

Call it what you will, but 2016 was an interesting year and I’m not just talking politics! There were a lot of incredible bicycles featured here on the site, many with even more interesting stories and some were even affected by the events of 2016. We’ll get into that a bit later. Grading these beautiful machines is anything but easy and usually requires a few days of data compiling, including but not limited to social media chatter, visits, comments and time spent on that particular page. Since all bikes can be beautiful, this list includes both custom and production bicycles. Some of these will be a no-brainer, others even surprised me. Without further adieu, here are the Radavist’s Top 10 and Then Some Beautiful Bicycles of 2016, in no particular order.

No bicycle is ever a completed work. At least in my opinion anyway, but sometimes a bike is at a place where you step back, look at it and smile. The other day I caught Cari doing just that. Smiling as she looked at her bike. She then said she’d like to photograph it in the forest. We were in Santa Cruz at the time and had just finished up a killer loop through the redwoods and down to the coast.

Let’s back track a bit. Around NAHBS last year, she mentioned that she’d like an upgrade from her current bike, an old Nishiki road bike that was a couple sizes too big for her. We looked at the market’s offerings and discussed what ideally she’d like in a bicycle.

Once she had a budget, it was easier to nail down exactly what her options were. I knew NAHBS was coming up, so I emailed a few builders, including Elephant to see if there would be any deals rolling around. Throughout this whole process, I couldn’t stop thinking about how the National Forest Explorer was a perfect “all-rounder” bike when I reviewed it. You could tour on it, ride trails and use it as a grocery getter. Since we have endless dirt, right from our front door, the idea of having a nice, plump tire for Cari was a plus. Anyway, John at Elephant told me he’d have a size small, complete, at NAHBS for sale after a customer backed out at the last minute.

NAHBS came and went, we picked up the bike and began riding all over Los Angeles. Fast forward a few months, a few part swaps and here it is.

A few years ago, Todd from Black Cat Bicycles was on a road ride with a friend of his when they were both struck by a car, exceeding the speed limit on the narrow, remote road they were on. It was a terrifying experience as Todd fought to save his friend’s life, while working through his own sustained injuries. At the end of the ordeal, both of them survived, yet with some serious injuries. Luckily no one died and both cyclists can still ride. Ok, something died: Todd’s love for road cycling. Ok, maybe “died” is a bit extreme, but after an experience like that, I can’t say I’d be stoked to kit up and hit the road again.

As you might imagine, my life can sometimes reach a tipping point when it comes to cycling. When I’m not on the road for events, I’m at my home, which happens to be above a bike shop. This means most of my spare time, when it exists, is spent fully immersed in bicycles. Come the end of the year, I’m usually ready for a break. Unfortunately, the last bit of wick has yet to burn. September brings about Interbike and suddenly, the cycling industry awakens. Suddenly my days are filled with phone calls, planning advertising and talking about press launches. While the rest of the world slows down towards the holiday season, my life intensifies. This year, I had plans to attend Eurobike, but then my girlfriend mentioned that her friends had won the lottery to hike the Subway in Zion National Park, Utah. For many outdoorsy people, the Subway is a once in a lifetime opportunity. Sure, you can always enter the lottery over and over again, but very few actually get to embark on this memorable hike. For instance, Cari’s friend had entered the lottery for four years before getting a permit.

Say what you will about hardtail mountain bikes. Die hard park rats think they’re antiquated, beginners often times think they’re hard to ride and the most common complaint I hear is that it’s hard getting bucked all over the place without rear suspension. Granted a lot of those common conceptions can have some truth to them, yet with the advent and availability of new rear spacing, dropper posts that work really well and bigger tire sizes, a hardtail can be pretty damn capable and even a lot of fun. For the past six months, I’ve been riding what I consider a new benchmark in hardtail mountain bike design: a 140mm travel, slack and low, 27.5+ hardtail, complete with a dropper post and a 1x drivetrain. This one in particular was built by hand in Napa by Curtis Inglis of Retrotec. So what does the creator of this beast call it? Well, what else? It’s a Funduro.

The Breadwinner Goodwater in Big Country
Photos and words by Gabe Tiller

Some friends and I had been scheming and dreaming up our Oregon Big Country route for an entire year, and this spring right as we were finalizing details Breadwinner Cycles launched their new Goodwater 27.5+ trail bike. I’ve known Tony since he moved to Portland from Salt Lake and watch him build bike after bike, each more lustworthy than the last. And they’ve pulled home award after award from NAHBS and the Oregon Manifest too. His meticulous craft building bicycles has become impeccably tuned, and the few times I’ve had the opportunity to ride bikes with him he’s whooped me soundly on the trail as well.

A few years ago when Surly launched their plus platform I took my first ride on the Krampus and instantly knew mountain bikes would be forever changed. Wider rims, more volume, and less pressure allowed me to clean technical lines I’d never come close to before. Rim, tire, and tubeless technology had brought high volume and large contact patches to the table without the weighing anywhere near as much as the motocross wheels they looked like. I was sold and thrashed my Krampus for a year before upgrading to a Ti Gnarvester. And now I really wanted to steal away on Tony’s fat-tired trail bike for our eight-day overland adventure through Oregon’s Big Country. Surprisingly when I asked, he agreed: “Sure, and ride it like I would—hard.”

He and Ira are often heard saying “We build the bikes we ride” and it shows in the Goodwater. Tony spends a fair amount of our rainy winter sessioning The Lumberyard and while the Goodwater is designed for an entirely different riding environment, he has maintained that nimble playfulness that make park bikes so fun. Giddily riding it home I could feel it begging to be flicked up curb banks and manualed through puddles. It’s got the shortest rear end (440mm) of any plus bikes I’ve ridden, and paired with the Fox Float 34 it cruises over rough terrain and still easily wheelies through desert stream crossings. At least the ones not filled with axle deep mud.

With internal routing, Shimano’s XTR Di2 1×11 drivetrain, Enve HV hoops, and a Thompson dropper it’s an incredibly clean build. It loaded up super well with my Porcelain Rocket Mr Fusion dropper hack, a Revelate framebag, and Limberlost’s DIY Handlebar Roll. It tackled the steep climbs and rocky descents over the Steens with ease, and the 2.8″ Schwalbe Nobby Nics held up well being pushed hard in loose corners or slogging through the Big Sand Gap on our way to Willow Hot Springs.

My only regret is that I didn’t get the chance to drop all the bags and really let this shreddy trail bike shine on some local singletrack before wearily giving Tony back his baby. I’m excited to see so many mountain bike builders embracing fatter tires, and Breadwinner is pushing the momentum of this movement with their Goodwater.

Follow along with the rest of our adventures at Limberlost.co.

____

Follow Gabe and the Limberlost crew on Instagram and check out Breadwinner’s Instagram!

Doppo Kunikida was a Japanese naturalist, one of the best. In fact, he’s the founder of the movement which focuses on, you guessed it, nature in literature. This love of nature inspired Sim Works to develop their own touring bike, one that would take a 27.5 or 29″ wheel and be prepared for just about anything you’d encounter on the road or trail. The Doppo is a steel bike, made in Nagoya by the framebuilder Shin and was first debuted at NAHBS this year. This is Makato’s personal bike, which he affixed with racks and panniers for our tour, while utilizing the “anything” mounts on the fork and the Sim Works “Homage” tires. You can read more about the Doppo at the Sim Works blog and contact them for ordering information…

This bike looked so good on the top of Mount Mihara that I had to shoot a few photos of it. Enjoy!

I’ve documented a lot of bicycles in my day and I’ll be honest here when I say, it’s been a long, long time since I’ve seen something as clever or unique as this bike.

At first glance, this Dobbat’s commuter looks like you’re run of the mill 1x road bike. Then you notice the flat, stand-off headbadge, which leads your eyes to the asymmetric brake routing in the top tube, which you then notice is actually quite confusing in terms of construction. Stepping back from that detail, you begin to notice the light support rack simply dies into the fork blades and it takes a moment to find the set screws.

Details like this are NAHBS-level in terms of concept and execution, yet Takayoshi has never been to NAHBS and he doesn’t spend time on the internet looking at other bikes. In fact, when we asked him what inspired these details, he said “it just popped into my head.”

If Japan keeps rolling out bikes like this, my shutter finger is going to get tired!

Back at NAHBS, my lady friend Cari bought an Elephant NFE for her around town and touring bike. While we’ve done plenty of local, in the neighborhood rides and even a few fireroad jaunts while camping, we’d never done an official ride – to a destination anyway. For a few reasons, the most pressing issue being her general fear of descending down rocky, rutted and steep fire roads. Which, as you’ve seen in the Reportage here on the site, is pretty much all we have in Los Angeles.