Readers’ Rides: Bryce’s Woodpecker Cycle Co x BogeWorks 29er


Readers’ Rides: Bryce’s Woodpecker Cycle Co x BogeWorks 29er

Bryce sent in this stunning Woodpecker Cycle Co x BogeWorks 29er touring bike and while we pick our jaws up off the ground, why don’t you check out more beautiful photos below!

I wanted to share a build we just completed and hoped y’all at the Radavist would dig it too. It’s been a year-long build, navigating parts and material shortages that the pandemic created, we are finally done. This bike build was a collaborative effort with a local frame fabricator and BogeWorks.

BogeWorks is a small custom bike bag maker based out of Seattle and Woodpecker Cycle Co. is located in Lacey Washington.

The frame, handlebar and aluminum cradle were spec’d by BogeWorks, fabricated by Woodpecker. The bike was designed to be an all around shred machine but still have the ability to pack up for some long distance bikepacking adventures – aka a shredpacker.

After completing the build, Daren from Woodpecker and I (Bryce) made the maiden voyage on a local bikepacking trip. Up Baby Shoe pass and onto Council Bluff. The pictures are with Mt. Adams in the backdrop.

Here’s some specs about the build.

Complete ultra light bag set made using Ultra 200, Dyneema DCF and ECOpak 200 fabric. All the bags are taped and sealed. The framepack was built with oversized waterproof zippers for durability and to maximize its’ weatherproofing.

• Direct-mount framepack
• Bar bag, with a custom bolt-on aluminum cradle & hardmounted Austere MFG CAM buckles
• Direct-mount top tube bag


• Woodpecker steel handlebar / shims / aluminum cradle + Austere MFG cam buckles
• RideFarr arm rest
• 5DEV 165mm cranks / XTR pedals
• ENVE MTB boost carbon fork
• Chris KING headset
• Widefoot Cargo cages
• Canecreek Hellbender T47 bottom bracket
• Industry 9 Hydra 280 carbon wheelset 32H
• Maxxis IKON 2.6″/2.35″
• XX1 shifter
• X01 cassette / derailleur (ratio technology oversized pulley cage)
• Wolf Tooth 36t chainring
• Paul Components Klampers & levers (compressionless housing)
• Brooks c13 158mm carbon saddle, with hand brushed rivets
• Thomson Elite cockpit
• Forager Cycles cable cherries
• SRAM HS2 180mm rotors
• RoachedClips valve cap
• GREPP bar tape
• x2 Custom Woodpecker brass & x4 Shadow Conspiracy bar end plugs

I’m sure I’m missing some info but that’s the main stuff. I’ve attached some pictures and I have more – if you guys would like some.

Thank you for taking the time to read this. Hope you guys dig it!

Much love & respect,

Bryce Kirk

We’d like to thank all of you who have submitted Readers Rides builds to be shared over here. The response has been incredible and we have so many to share over the next few months. Feel free to submit your bike, listing details, components, and other information. You can also include a portrait of yourself with your bike and your Instagram account! Please, shoot landscape-orientation photos, not portrait. Thanks!