The Radavist

2018 Philly Bike Expo: Chapman Cycles Bi-laminate Light Road Bike
Photos and words by Jarrod Bunk

With the construction of the frame, fork, rack, and stem all in-house Chapman can create a bicycle with details that carry over throughout the entire build, such as the quill-stem that flows into the headtube.  A build of mostly Campagnolo Athena with Grand Bois Chouette center pull brakes to clear the 32c tires and fenders ensures that this bike can roll in all weather. The culmination of materials, labor, and talent are apparent, and they really pop under natural light.

____

Follow Jarrod on Instagram, and Chapman Cycles  on Instagram

2018 Philly Bike Expo: Pratt Track Bike
Photos and words by Jarrod Bunk

Sometime after Red Hook Crit this year, Jocelyn Tipton had her race bike stolen, luckily for 2019, they found a new ride, this Pratt.  Joining Dani Moreshead and Sam Fox this year for a new all-women team Pratt/Phil Wood will be competing at Red Hook Crit Brooklyn and Milan, Mission Crit, Redbull Last Stand, and a few others in preparation for 2020 fixed gear nationals.

The build features some nice touches from Phil Wood, including their hubs, headset, and seat collar as well as tires from Challenge and rims from Princeton Carbonworks.  The paint was a mix of spray-bike and the graphics were designed by Still Life.  One thing for sure this bike will turn your head at breakneck speed during the races, so take a moment and check the gallery above and good luck to the new team!

____

Follow Jarrod on Instagram, and Pratt on Instagram

2018 Philly Bike Expo: Hanford Cycles Randonneur
Photos and words by Jarrod Bunk

Hanford Cycles, based out of Philadelphia had this Randonneur bike tucked away in their booth, upon closer inspection I noticed it had a lot going on with it.  I hadn’t heard of Hanford Cycles prior to the show, but from what I gather, Simon of Hanford Cycles had worked for Bilenky for 14 years, before stepping out on their own to create Hanford Cycles.

With ornate hand carved lugs, hidden wiring to a very unique mount for the Compass Taillight, and some fresh paint by Chill Cycles it’s easy to see why even hidden in the final aisle of the Philly Bike Expo it still garnered a runner-up in the peoples choice award. Flip through the whole gallery, this bike is full of details

____

Follow Jarrod on Instagram

2018 Philly Bike Expo: JP Weigle Randonneur
Photos and words by Jarrod Bunk

These functional bikes aren’t just gorgeous show bikes though, each one gets ridden and tested to make sure it passes the ride quality that a Weigle is known for.  Every shape and line of this bike flows together, as the construction and build of the bike are done together creating something gorgeous and refined.  The build is comprised of Compass parts including René Herse cranks, Loup Loup Pass tires as well as Campagnolo Chorus. This modern Randonneur is ready for anything Connecticut weather can throw at it.

____

Follow Jarrod on Instagram, and JP Weigle  on Instagram

2018 Philly Bike Expo: MAP Cycles 650b Disc Rando Bike
Photos and words by Jarrod Bunk

Mixing the traditional with the non-traditional this build includes a Rodeo Labs Spork, Paul Klamper CP calipers, Rene Herse Cranks, and Campagnolo Centaur checks all of those boxes for a versatile modern rando bike. Mitch made the front rack and stem to compliment this bike and they pair together perfectly.

____

Follow Jarrod on Instagram, and MAP Biycles  on Instagram

Grove Gathering: Grove Innovations Assault Team Bike
Photos and words by Jarrod Bunk

This assault was one of the first 10 assaults to roll out of production in Grove’s Pennsylvania factory and was ridden as a team race bike in the early 90s.  I can’t imagine if I were in attendance back then, my mind would’ve melted as a ten-year-old.  Just look at it! Fade, check, splatter, check, crackle, WHAT? This Grove has one of the wildest paint jobs I’ve seen on a bike. Sadly I’m told that this paint can’t be replicated because the chemicals don’t exist any longer.

Not only did Grove make frames, forks, stems, and handlebars, but perhaps the coolest of all of the Grove parts is the Hotrod cranks.  At the time square taper was everywhere, but Bill Grove and his team looked to military applications and came up with an asymmetrical polygon, very similar looking to the interface that E13 uses in their cranks today some 25 years later.  They thought if tanks used this design it should be strong enough for a bicycle application. These two-piece cranks used a row of four bearings (two per side) and some seals to keep the weather at bay. Aside from the cranks, this build features some pretty standard parts for a grove of the time, including the Hammerhead bar/stem, and some Shimano XT parts.

____

Follow Jarrod on Instagram and Second Spin on Instagram and Freeze Thaw Cycles on Instagram

Grove Gathering: Grove Innovations Prototype Hardcore
Photos and words by Jarrod Bunk

Earlier this year, Martin from Second Spin and Justin from Freeze Thaw Cycles schemed about an event that would let them share their mutual love for Grove Innovations and get together some Grove owners for a ride and party or shred-n-show if you will, that event was the first Grove Innovations Gathering.

Grove Innovations might not be a household name if you live outside of Pennsylvania, but Bill Grove and his team were innovators that tried some new things that many others wouldn’t dare for the sake of creating a bombproof bike. The oversized  2″ 4130 downtube and straight blade fork made for an extremely precise steering bike with a stiff bottom bracket junction that allowed the pilot to put power into the ground and control it over all types of terrain.  The hardcore, at its inception, was an east coast bike if there ever were one, playful, rugged and capable of hucking off a loading dock as well as ripping over log-laden single track.  With a 13.5″ bottom bracket, and integrated bash guard that even protected all 44 teeth on the big ring, the hardcore could make short work of the rugged rocky terrain of which this bike was born. Most of the builds done on groves of this vintage ran durable parts in favor of early 90s anodized bling. Each frameset came with a set of Hammerhead bars as well, and bottle cages painted to match, albeit this proto isn’t running the latter.  Proof of the concept in durability is that this prototype is still being ridden nearly 30 years later.

____

Follow Jarrod on Instagram and Second Spin on Instagram and Freeze Thaw Cycles on Instagram

Named after a trail. Well, THE trail that dances along the Little Grand Canyon in the San Rafael Swell, Utah, the Goodwater is a completely capable and versatile hardtail from the team at Breadwinner Cycles in Portland, Oregon. We’ve seen a review on this bike from Gabe Tiller and now here’s Ethan from Breadwinner’s own bike. A massive XL frame with a saddle height so high that I had to use the dropper to get a leg over it, I was impressed with how damn good it looks at a particularly large scale. As a big dude myself, it’s not often I shoot a bike this large!

Spending time at the Breadwinner Cafe was a real highlight of my trip to Portland and maybe next time I can pull Ethan out on a ride. The last ride I had with Tony and Ira resulted in some of my favorite Portland MTB photos…

____

Follow Breadwinner Cycles on Instagram and follow the Breadwinner Cafe on Instagram.

For the past few years, Chris King has opened their doors to the public as part of an entire weekend of events dubbed the Chris King Open House. This event’s intent is to be coordinated with a product launch of their new colors for the year, as well as to showcase what makes their operations tick, and to display a selection of custom bikes, built by some of their best builder customers.

the two new colors for this year: matte turqoise and matte mango.

This year, they sent out an open invite to 30 of their best builder accounts, offering up discounted pricing to them to build a bike for the show, passing on the discount to their customers. Out of those 30 builders, 17 showed up, and they were displayed alongside a Pegoretti bike, which we looked at on Friday. These bikes lined the halls of the Chris King factory, where visitors could look at their features in great detail, chat with the builders about their process, and if they were so inclined, purchase their dream bike.

I was invited up to the Open House to document these bikes for the builders and for Chris King, as well as offering up an ultimate dream bike gallery for you, the readers of this website. Please enjoy! Which bike do you like the best and why? Oh and if you’re interested in one of the bikes showcased here, be sure to reach out to the builders, who are linked in the bike descriptions below.