The Radavist

When Erik and I met at Eurobike last year, we talked about doing a ride to celebrate the Specialized AWOL release. Originally, we talked about Oregon, then LA, but after some research, we realized there were plenty of roads, tracks and trails literally in SF’s backyard.

With the help of Jared from Riv Bike, Erik began to think about a three day route from SF to the Diablo Range, Morgan Territory, Henry Coe and finally, into Morgan Hill where we’d share our story and watch the premier of the Transcontinental film. It seemed like an achievable goal. We’d pack for camping, which included cold nights and mornings and most importantly, we’d take our time.

Rather than actually planning our route, we decided to take trail maps and meander a bit off the beaten path. Digital maps don’t have all the trails marked and some of the current maps of the Diablo range revealed a path none of us had taken. We were set.

Unfortunately, as it tends to go, unexpected elements came into the equation and our plans changed. At first, I was pretty upset about it, seeing as how I was planning on pulling a few stories out of our ride, but after reviewing my photos, I decided it made for a good story…

Part of what the Specialized AWOL project represents is an escape, a desire to get out of your normal ride routine and try something new. Taking a chance if you will. While we didn’t complete our ride, we had fun and saw some incredible displays of color as Mother Nature impressed us all.

Seriously, the sunrise the second day rivals all in my past experiences…

Read on in the Gallery!

There’s more to come, including my review of the AWOL Transcontinental Limited Edition and a Beautiful Bicycle post on Erik’s own bike.

Everything thing you’ve heard of Eurobike is true, including the horribly-spotty wifi. But don’t worry, I’m spending all my time shooting photos and catching up with friends, including Erik from Sweden. He and his wife, Sofia stayed with me two years ago in Austin and since then, he’s toured extensively throughout the USA, relocated to Zurich and is a lead designer at Specialized, where he spearheaded the AWOL project.

The AWOL is a light, sleek and very Euro-styled touring bike. While Erik’s main rig is on display at the Specialized booth, he stripped down one of the first prototypes and brought it along with him to ride around. After a few beers, we went out back and shot some photos of the bike. I’ve gotta admit, it’s one of my favorite touring rigs!

Check out more in the Gallery!

Ever have one of those rides where a crazed redneck kicks you off “his mountain” and you end up somewhat lost, having to re-route yourself? Yeah. This was one of those rides. Not that I’m complaining. If Santa Cruz is dirt heaven, then surely the roads are worth a mention.

During the ATOC this year, a few of us got together and rode from Santa Cruz to San Jose. Leading the way was Garrett Chow on his FEA Venge. He promised a big climb, some poaching, a little dirt and heat, heat, heat. All of which were delivered. Then our route was truncated short by the above-mentioned, real king of the mountain…

60 miles and 4,000′ later and we were in San Jose, just in time to watch the last TT and drink a few beers. It’s a bummer we missed the stage, but so it goes. Check out some narrated photos in the Gallery!

Tools of the trade:
Yashica T4
Fuji Pro400H

When Ben Farver from Argonaut Cycles decided he was going to make the switch from building custom steel bikes to custom, made in the USA carbon fiber frames, he needed to find some local experts. The team at Innovative Composite Engineering, or ICE, were located just over the river in White Salmon, Washington state. Their expertise lies in everything from SUP poles to products for the aerospace industry. A few phone calls later and they began to meet to discuss a new, proprietary system for manufacturing custom carbon fiber bicycle frames.

ICE and Ben began to collaborate. They both were motivated to develop the frame using the best and most advanced molding technology, and to bring something new to the industry. They both pushed each other to do this without compromise or cutting corners, deciding on a few key points: There would be no vacuum forming, no tube to tube carbon lug bonding and no real hand finishing needed. The process would be streamlined, efficient and most importantly, customizable. While I can’t show you the juicy details, which I can assure you are juicy, I can show you snippets of the Argonaut Cycles process.

It begins with a roll of carbon, which is then cut out based on digital CAD templates on a large cutting bed. Each piece is based on the individual parts’ dimensions. From there, the carbon is inserted into aluminum molds, around a bladder where the resin layup occurs. Then, these aluminum molds are heated, allowing the resin to cure. This is repeated until all the parts are finished. When it’s all said and done, the frame is ready for assemblage.

Shot at ICE, these photos lay out the process used in manufacturing a 100% made in the USA carbon bicycle frame, like my Argonaut Cycles road.

EDIT: see a reply from Argonaut below that answers many questions everyone seems to have…

Since I can’t make it out to every rad event that takes place in SF, It’s nice to have Mike Martin of Mash to offer up some choice photos from the The Bicycle Art & Design of Garrett Chow: All Chips on the Table gallery show and Cutty Cross race. This show looked amazing and these photos will serve the purpose of introducing you to Garrett’s work if you’re unfamiliar.

Also, don’t miss out on a few shots of Garrett’s Specialized Concept Venge road bike after the show photos.

I’ve been trying to type out a few introductory sentences for this bike for the past few minutes and honestly, I have no idea where to begin. So let’s start out by me saying that it is by no means the first carbon fiber bike I have been offered but it was the first that had a compelling story attached with it, something I’m always intrigued by and will ultimately make for a better piece of journalism.

For the past year or so, I’ve been watching Ben at Argonaut Cycles reinvent his modus operandi. He made the shift from building steel bikes to developing a new fabrication system with a local carbon manufacturer. Unlike anything else currently being manufactured domestically, or overseas, the new face of Argonaut is focused on the future of bicycle design. But that’s not to say that Argonaut’s steel past had been cast aside.

Before he even began to sketch out his design, he met with the carbon engineers, who reverse-engineered some of his favorite steel tubesets, and improved upon their weaknesses. Ben wanted his bikes to have the same ride characteristics of his steel bikes, just more technologically advanced. He came to loosely call this “steel 2.0” but you should take that with a grain of salt because let’s face it, carbon fiber is not steel.

This bike is however a by-product of domestic engineering and fabrication. The carbon weave is from the States. It’s cut to shape, moulded by a proprietary process, assembled and finished all within an hour drive from Portland. The process used produces very little waste. There’s no hodgepodge assemblage, no messy resin and it’s 100% custom. Basically, it’s a streamlined process that utilizes technologies that allow each frame to be engineered to a customer’s specific needs.

That’s what had me intrigued in Argonaut and so I agreed to come on board. Soon, I started to hear the echos of “steel is real” in the back of my head, however. I knew my Bishop is as perfect as a steel bike could be. The geometry is dialed and I’ve never ridden anything like it. So I approached Ben with the idea to make the exact same bicycle, just with his new carbon manufacturing process.

Dimensions, trail, geometry, were all the same, just the profile changed a bit to a racier silhouette. Even the tube’s proprietary layup were influenced by the same steel that my Bishop is built from. Bottom line is, I wanted to be able to subjectively compare the two materials.

After I filled out my ride journal, had numerous talks with Ben and designed the paint, the bike was done. Last week, I arrived in Portland and immediately got to check it out. First thing I noticed was how much of a stellar job Keith Anderson did on the paint. The build wasn’t bad either! Rotor cranks, SRAM Red group, ENVE tapered fork, ENVE bars, Thomson stem, Fizik Kurve saddle, Chris King hubs to H+Son Archetype rims (built by none other than Sugar Wheel Works), Chris King PF30 ceramic BB and that special I8 Chris King headset. It was a dream build.

But what about the ride? The first day, we did a nice 25 mile ride up Saltzman, then Saturday, we headed out towards Mt. Hood for 75 miles (then Billy broke a spoke and we had to call it quits). My initial reaction is very optimistic. The ride is what I can only call “light and responsive”. It handles like my Bishop but even better. Descents are faster and it climbs with little or no qualms. There’s no jarring feel when I hit rough terrain. Everything feels dampened and smooth.

My previous experiences with carbon rental bikes like Cervelo, Specialized and other brands were always harsh. The bikes were stiff and I didn’t enjoy the ride. I’m not a racer, I don’t need a bike engineered to race. I need a bike that rides how I want it to, when I want it to and that’s what Argonaut produced for me. It really is like steel 2.0… So what about my Bishop? There’s nothing on this planet that would make me stop riding it. That’s a fact. Steel is still, real but this new experience has been loads of fun. As for the bike itself, it’s very easy on the eyes.

The bike weighs 15.5 lbs as seen here (minus bottles). With middle-grade LOOK pedals, 32h wheels and 28c tires, that’s not bad at all.

See more photos in the gallery!