The Radavist

Midlife crises come in all shapes and sizes. For some, a bright red Mustang relieves the itch. For others, some Eat Pray Lovin’ on a beach in Bali is just the ticket. But for Joe McEwan, Founder of Starling Cycles, chucking in his job as a successful aerospace engineer to build steel mountain bikes in a garden shed was just what the doctor ordered.

In this shop visit, we dig into the brand’s origin story, go behind the scenes at their Bristol workshop and learn why their signature single-pivots and retro rear shocks prove that simplicity never goes out of fashion.

Taylor Doyle (she/her) is an ultra racer and founder of the Ultra Distance Scholarship, an initiative increasing diversity and representation within ultra distance cycling and racing. She is a self-proclaimed ‘make-things-happen’ person at the socially conscious bike-builder Stayer Cycles, and always riding her beloved UG. Taylor is passionate about sharing the joys of ultra distance cycling with as many folks as humanly possible and is particularly invested in encouraging and supporting more women/non-binary folks and people of colour to try the sport. Taylor is a Canadian writer and photographer currently loose in the UK, living nomadically and turning up at most UK-based bikepacking events and happenings. After getting frustrated by the amount of single-use plastic she was generating during her first ultra race, she decided to come back the following year and try things differently…

Cairo to Cape Town. The words tumbled together in poetic cadence. Africa’s malleable cycling route from the Pyramids of Giza to Table Mountain was my dream of a decade. Soured by the rigid nature of sponsors’ expectations, I chose a bare-bones expedition. Plans and timelines aside. To travel for travel’s sake. To sink my teeth into the truth and toss the rest by the wayside. I started from the Egyptian pyramids with just my kiwi partner, the most efficient machines ever created, and the entire African continent ahead. Southbound and on edge, we began our trans-continental cycling journey dissecting Egypt, Sudan, Ethiopia, Kenya, Tanzania, Zambia, Botswana, Namibia, and South Africa.

Hello dear readers. Are you ready?

Buckle your seatbelts, put on your out-of-office. Be sure to prepare a too-carefully-constructed pour-over coffee, or maybe a glass of tap water, and settle in. We are about to embark on a journey together, an unbiased, at times fanciful, long-term review of the GMX+ adventure bike from Curve Cycling.

The artist Russ Pope is a west coaster-turned-New England émigré. Growing up as a skateboarder and an artist, he brought his two passions together at a young age. Creativity has been intertwined with all his outdoor pursuits since, with a portfolio that boasts many skating and cycling collaborations. Hailey Moore recently had the opportunity to sit down with Russ to talk about it all—Read on for a rundown about his life of skating, arting and bikes and to learn more about a Russ Pope drawing giveaway! Thanks Russ!

Following the review of his MASH SF Steel All-Road from earlier this year, Chris Corona is back with yet another MASH bike review. This time, he’s built himself a steel “Rockbanger” 27.5 hardtail mountain bike and documents it in his stunning photographic style. Let’s check it out in detail below!

Good ol’ Ronnie. How many bikes have we shot together now? It all started with a chance encounter in Austin in 2014 when I documented his Trek 970. Back then, he was known as Benedict and dressed in his post-Wooly Mammoth roadie persona; lumberjack meets blast beats, sprinkled with some Tolkien lore and usually seen astride either a vintage MTB or a Rivendell, dribbling olive oil on his vintage Suntour components. This was early Ultraromance—the genesis of his persona—when he had just begun to crack open the internet with his wild style and über cøøl bikes. I love this man, no matter what name he festoons his internet crown with. Always have. Always will.

Fast forward to the 2022 Philly Bike Expo, where I recently met this gentle yet patinated gent once again to document a bike that picks up where our Duralcan post left off.

The Alumalith is the latest model to be released from the Ron’s Bikes x Crust Bikes cache and the first US-made aluminum bike he’s designed, with Frank the Welder at the helm, speccing tubing diameters and laying down iconic beads on brushed, raw aluminum. Let’s check it out below!

Looking at an Oddity Cycles-designed frame, handlebar, or fork, you might think that it was welded in a circus sideshow tent by a depraved, frazzle-haired, torch-wielding, radical. That these wildly bent steel and titanium tubes, contorted and bonded into freakishly beautiful forms, could only have originated in the darkest corners of a PT Barnum exhibition. And that’s exactly what Sean Burns, founder, designer, and fabricator wants you to think. So, on this eve of All Hallows, let’s pull back the curtain on this iconic framebuilder, and his assistant “Spooky,” along with a close look at a couple of Sean’s personal two-wheeled creations…

Over the years, we’ve done a lot with Argonaut Cycles, from documenting its first shop location to photographing its race team at the Rouge Roubaix and shooting bikes at various showcases. The brand has come a long way in that time and today, after three years of design, testing, and research, they are releasing the GR3, a next-gen custom carbon gravel bike.

While in Bend, OR, recently, Josh caught up with the Argonaut Cycles team for a tour of their facilities and sat down for an interview with founder and designer Ben Farver. The conversation covers the brand’s fully custom in-house carbon frame and component production methods and more. Below, find Argonaut’s GR3 introduction, Josh’s interview with Ben, and an extensive photo gallery detailing the Argonaut fabrication process!

The first time I caught sight of Ronnie at this past weekend’s Nutmeg Nor’easter, he was handing out welcome gifts as a crowd of riders waited for the ferry’s return on the west banks of the Connecticut River. “Get your poop bag, everyone gets a poop bag,” he exclaimed—like the bygone vendors who’d hawk peanuts at old baseball games—doling out little green compostable doggie bags between hugs and hearty salutations. I later learned 250+ riders had shown for the two-day rootsy New England bikecamping event; a far cry more than the group of five dozen that made up the inaugural Nor’easter six years hence. For me, this would be my first time in Nutmeg country!

Every bike has a story, but some intrinsically harbor more nuanced lore. As you might have noticed, over the past few years, I’ve acquired a few Ritchey frames from the 1980s. We’ve previously covered my Everest and the story of Tom’s early Bullmoose designs; I also have a 1985 Annapurna, and this no serial number 1980 Ritchey, which might be the best build yet.

This era of mountain bike design and development is my favorite. In the late 70s, guys like Joe Breeze built beautiful bikes inspired by balloon cruisers and klunkers. Tom Ritchey, inspired by the frenetic energy of the mountain bike genesis, began making fat tire frames in the late 70s. From 1980 through 1981, several bikes left Tom’s shop, including the fabled ‘chicken coop’ bikes, and a few were built void of any serial number.

This bike is the latter, and boy, does it have a story…

We’re back today with Josh’s second installment of coverage from the Bespoked Handmade Bicycle Show! Let’s jump right in below with more recapping and a gallery of beautiful builds from Prova Cycles, Clandestine, Black Sheep Bikes, Etoile Cycles, Dawley Bikes, Avalanche Cycles, Coal Bikes with Black Cat Custom Paint, Fahrradbau Stolz, and Sour Bicycles…

Just over one week ago Josh was in London for the 2022 edition of Bespoked Handmade Bicycle Show. Under new ownership and management, the show moved from its former location in Bristol, England to the Lee Valley Velo Park in Stratford of East London. With three days of track racing, talks, food, hangs, coffee, enviable new products, and—of course—hundreds of eclectic and beautiful bicycles on display, the show was a major success for the new organizers, exhibitors, and attendees.

Let’s dive straight into Part One of our recap below with a look at bikes from a bevy of builders: Sturdy Cycles, Quirk Cycles, Donhou Bicycles, Sideways, Lord Cycles, Stayer Cycles, Ted James Designs, and Auckland Cycle Works…