The Radavist

A while back, Kyle reviewed the mostly stock complete Log Lady before sending it back to All-City so they could use the bike in their demo fleet. Truthfully, I, like many of the readers who commented on that post, were bummed to see that bike go. As a photographer, I love shooting with Kyle when he’s stoked on something and that bike was perfect on our local trails, for him especially.

In an industry where many people want more travel, not less and even more gears, not one, the Log Lady stands out as an archaic, living fossil of the mountain bike evolutionary timeline. For some people, riding a bike like this down technical trails would be a nightmare, but for dudes like Kyle, it’s a buckin’ good time.

On Saturday, I received a DM on Instagram from a kid named Zach who had just built up a new VYNL road bike. It was the first VYNL to use masked decals, not stickers and from what I could see, looked to be a slick build. I told Zach to come by GSC and I’d love to shoot photos of it. Little did I know Zach would roll through at mile 70 during his ride, in the complete opposite direction he needed to be going. That’s what “new bike day” does to you though…

As mentioned earlier, VYNL is now offering masked decals, straight from the paint booth. Zach’s is built up with Ultegra and Ritchey components and is very no-nonsensical. After riding various carbon bikes over the years, he missed the way aluminum road bikes felt and started looking. VYNL was at the top of his list, so he placed an order and waited.

The end result is what many would consider a damn beautiful bicycle and clearly, Zach is loving it!

Words and photos by Morgan Taylor.

There are many ways you can build a bike for traveling and all of them have their virtues; striking a balance is not as much a universal truth as it comes down to where you want to make sacrifices. When Stephanie and I set out to build these bikes, we had the long term in mind. Not just the fact that we intended to spend all summer riding them around the western United States, but that we wanted bikes that would be useful beyond that trip.

For us, the guiding principle along the way was that we wanted bikes that would be fun around town and commuting bikes when we came home, which is really what determined the frames we chose. We were building bikes for a honeymoon adventure but the lasting legacy was a bike that would fit in to our daily lives when that chapter came to a close. To put it simply, we didn’t want to tour on touring bikes. And after 4,000 kilometres of fully loaded riding, we’re happy we didn’t.

Cameron Falconer makes some of the nicest hardtails. What they lack in ostentation, they make up for in construction and thoughtfulness. RJ‘s bike is no exception. His 27.5″ hardtail is straight as an arrow, with a few key details to make life on the trail easier. Take for instance the asymmetrical chainstay yoke. Cam uses a plate yoke on the drive side and a smooth, non-crimped bend on the non-drive. This ensures ample tire and chainring clearance. He also uses stealth routing for a dropper, leaving a lot of interestingness going on at the bottom bracket cluster. The nice weldline at the seat tube cluster is so he can step down the seat tube diameter to fit a standard size dropper, without having to go super oversize or use a shim. Even the thru-axle and disc brake support just looks beautiful. All these details were then coated in a sparkle gold powder and vinyl decals, which as you can tell, show plenty of use!

We all know that the frame is only part of the bicycle. RJ selected some tried and true components to keep his bike rolling with minimal upkeep. Including a Shimano XT drivetrain, Race Face ring, XFusion fork, Giant dropper and a specially-machined dropper remote that began as an XFusion trigger, hacked to work with the post. It’s hard to explain… but it works! For wheels, RJ is testing and providing feedback on some carbon MTB wheels for Ritchey. That’s all I can say about those.

Yeah, this bike rules, it looks great sitting here, propped up in the Los Angeles morning sun, but looked even better during our weekend of trail riding!

Cue the speech from Independence Day, mashed up with Bruce Springsteen’s Born in the USA with a few fireworks and explosions, playing on a bluetooth speaker aboard a Ritchey from the 90’s (any one will do, just not those Lite Beam frames.) That was what inspired the newest from Stinner Frameworks and Golden Saddle Cyclery.

When I returned from Spain with that Monster Cross Crema Duo, rolling on 27.5 wheels and Maxxis tires, Kyle’s eyes opened wide, sparking a conversation. “Do you like those wheels?” Or something of that nature. After a few rides together, he called Aaron at Stinner, just as they were about to get started on his ‘cross bike and told them to hold off on design and construction. The following few days were spent problem solving how to fit that size tire and a traditional 1x crank. It ain’t easy and there isn’t Boost available for road / cross yet, making it difficult to get the chainstay clearance you need.

Why would you want those wheels anyway? See, Kyle and myself enjoy riding our ‘cross bikes on singletrack and dirt roads probably more than racing itself. What is essentially an XC tire fits in with this riding more, especially in LA, where the sandy and loose trails need as much rubber contact as possible. With a tubeless tire, you can run a low pressure and still have a large contact patch. So the 27.5 platform allows that, with some extra cushion too, but it’s nice to have an option to race. That’s what’s so versatile about a bike like this. It’ll fit a 700 wheel with up to a 45mm tire for racing ‘cross or it’ll fit a 27.5″ mtb wheel for thrashing trails and fire roads. The bottom bracket is designed to ride similarly with either wheel size. Coupled with the SRAM 1x system and its 10-42t cassette, you don’t spin out while you’re riding to the trail either. For wheels, I’ve been riding the WTB Horizon Road Plus system on my Firefly on and off, so I wanted to let Kyle get some time in on it too.

So what about that paint? Well, why not? That frame is made in the USA and today is the 4th of July! Stinner’s in-house design and paint team killed it with this one. My mind was blown when I saw this one…

Enjoy your 4th!

The Vanilla Workshop has multiple tiers in terms of frameset design and production. At the highest tier is a Vanilla. These are 100% custom, lugged beauties made entirely by Sacha White. Their wait list is so long, it’s not even worth mentioning. Then on the more readily-available tier is a Speedvagen frameset. These used to be only available as a 100% custom geometry with multiple options from paint, ranging from a simple, single color with detail hits to complex, “Surprise Me” paint jobs that are so wild, they’ve inspired how other builders tackle paint design.

Now, Speedvagen has a third option in its pricing catalog: the OG1 road frameset. These are stock frames, already painted and in stock now, ready to ship to you in days or weeks, not months. The OG1 also carries a pricetag that won’t make you choke on your morning breakfast, when it comes to a made in the USA frame anyway.

The OG1 is still made 100% by hand in the Vanilla Workshop and it’s painted in house with a custom Speedvagen design, usually two per year with the first year’s designs being limited to a matte lavender or a burly-looking matte olive drab! It’s obvious which color you’re seeing here.

These frames are a deal, but there’s a catch…

Bikepacking kits are all the rage these days and with good reason. You can take a rackless bike, add bags and get on the road easily. Well, long before ‘cross bikes were loaded down with bikepacking bags, dedicated touring bikes or even road bikes were fitted with racks and panniers for multi-day trips. Rear loading on a road bike is usually easier than attempting to front load them, since the geometry doesn’t really add much wiggle room in terms of having weight up front. Most road bikes are designed with a high trail, which can make front-loading unpredictable and downright scary. Not to mention most road forks don’t have rack mounts or aren’t engineered for such a load. Yet, with a rear rack, you can put the weight up a bit higher and further back without any hassle.

Jeremy Sycip brought this bike with him to Japan to display at the Circles Personal Bike Show and to tackle our Mount Fuji and Oshima bicycle tour. I was stoked when I saw his setup: a Ritchey Breakaway frame, with long reach calipers that’ll fit a 32mm tire and an elegant steel fork make for one classic looking ride. Jeremy rode the Gourmet Century Asuke on this, then added his rear rack and handlebar bag for the tour.

This is such a capable travel bike, built for whatever you want to throw at it or on it and best of all: it fits in a box that evades extra charges at the airport.

The number of people that roll through Golden Saddle Cyclery with nice bikes on any given day is impressive. So impressive that often times, I shoot their bikes, dump the memory cards and literally forget about them until one day I stumble across the photos. Ian was visiting LA back in February from NYC, where he works in film. Knowing that LA has dirt roads for miles, he brought along his 650b Seven Cycles Evergreen S, a titanium “all-road” bike built for long days on dirt. His bike has a few trick details, including the sub fork race-Edelux light mount and those juicy Compass Babyshoe Pass tires. With the reliability of Shimano Ultegra hydro, solid Ritchey components, a titanium post and a vintage Flite, this bike is just begging for trouble in the mountains! If you see Ian, tell him LA says hi and to holler next time he’s in town!

Sea Otter, ORNOT
Words and photos by Nich Barresi

Sea Otter is great. There’s lots of new bike stuff, racing, camping, beer, and friends, but we had a hankering to get out on some dirt roads after hanging out with Ritchey on Friday. We had heard of an abandoned dirt road down in Los Padres National Forest and we felt this was the perfect opportunity to check it out (and maybe test out a few new products). Indians Road can be accessed by Arroyo Seco Campground and leads south into the wilderness. Our plan was to camp near the trail, ride it in the morning, and then get back to Sea Otter in the afternoon.

We spent the evening in the woods and woke up to birds chirping and warm morning light kissing nearby hilltops. Try waking up like that at Laguna Seca campground… After a bit of camp coffee and ride preparation, we were on our bikes and headed up the hill.
The pavement ended first, and then our ride, temporarily.

Matt managed to slash a nice hole in his brand new tires’ sidewall 10 minutes into the ride. We booted with a greenback, threw a tube inside, and were on our way. Enter ‘day long anxiety about being stuck in the middle of nowhere with a blown out tire’. We knew we were on borrowed time with a boot, but we weren’t about to give up so soon.

Indians Road is a pretty special place. The road was shut down in ’94 after winter storms caused two landslides along the road, and it remained closed due to pricey and non-ecological repair estimates. The military finalized the closure after 9/11 when the stated the road, which is right next to Fort Hunter-Liggett, would ‘require an increased law enforcement and USFS patrol’. The double track road is now overgrown and full of fallen rocks and sand. There is some dodging of said rocks, and of course a climb over the landslide, but it is certainly rideable on skinny(ish) tires. All together, it is an extremely enjoyable ride very similar to what you might find in Marin, but with a more Southern Californian look.

While you’re only 20 miles from Arroyo Seco campground, the remoteness of the ride and the great expanses you see along the way make it feel like you’re really “out there”. Be sure to pick an instagramable lunch stop…don’t worry, there are plenty.

Little did we know, Murphy Mack (Super Pro Racing) went and planned a route straight through Indians Road for his Spring Classic this weekend. Their ride starts down south and heads up through this same portion of Indians Road, and then into the valley via Arroyo Seco, and up to Gilroy. Should be an epic day for those who go. We never did make it back to Sea Otter, but it was a fair trade by every measure. After sampling a bit of the Indians Road goodness, it’s safe to say that we’ll be planning another longer trip. Hopefully not in the middle of the summer when this place must get HOT, Ornot.

____

Follow ORNOT on Instagram and Nich on Instagram.

The All-City Log Lady: Sometimes Bikes, Like Men, Jump Up and Say ‘HELLO’
Words by Kyle Kelley, photos by John Watson

From the beginning All-City has been ahead of the curve. They are dedicated contributors to the current evolution of cycling, pushing their own boundaries and those of the industry around them, making bikes that are actually fun to ride. They began making high quality, affordable track cranks and hubs when there was nothing but Campagnolo and Sugino to choose from. Next they introduced the world to the 32c production road “race” bike. After that, they took the cyclocross world by storm and produced a NAHBS quality production single speed cyclocross bike. And during the vintage MTB craze of 2014-2015 they made a modern day, old-timey MTB equally equipped for ripping down the trails as through the streets to the bar.

Tyler’s Electric Mexican Blanket Sunday Driver Chromag Road Bike
Photos by Ross Measures, Words by Tyler Morland

The idea was simple: Create a “Sunday Driver” of sorts. I took inspiration from a bike I was currently riding and blended it with that taste I have for old Ritcheys. My dad has this old Ritchey Timberline comp and I always loved the Fillet brazing look and feel. So Ian Ritz at Chromag Bikes and I started the conversation and we talked about every detail. We used raw material that Chromag had in stock and used something that they have refined for a couple of years, like the drop outs and generally put it through the process that all Chromag frames go through. The head tube was machined in shop and follows the taper of the fork. A real pain in the ass to make. Then, we chose curved seat stays to give it that plush steel ride.

He had no idea it would be this long of a process and neither did I. We roped in Chris Dekerf for the internal routing and brazing. North Shore Billet for the machined parts and sent the completed frame in for a crazy paint job at Troy Lee Designs. I visit TLD once a year for various reasons and those guys are just a bunch of beauties. I’ve been part of the family over at TLD FOREVER and this was a great conversation with a legendary painter… Why not electric Mexican blanket?

The build kit was a no-brainer. That just goes with the territory – All SRAM everything. I still can’t decide if I go ZIPP 303 or 202.

Basically, its special and part of my weird collection… Forever.

____

Follow Ross on Instagram and follow Tyler on Instagram and special thanks to Morgan Taylor for coordinating this post!

Porcelain Rocket’s Moots Fatty with Hunter Fork
Words and photos by Morgan Taylor

Our recent trip through the Rockies to visit Porcelain Rocket’s shop was months in the making. The plan was to start with the shop visit in Calgary and then backtrack for a ride with Kevin Tweed in Banff the following day. I was excited to experience first hand the majestic Canadian Rockies, and to ride with Kevin on his home turf – but we were skunked.

In the days approaching our visit, massive wildfires burning south of the border combined with stagnant weather patterns to send a blanket of smoke over much of southern BC and Alberta. I had imagined shooting Scott’s Moots with a breathtaking Banff backdrop that I knew Kevin could lead us to, but that idea was out the window. Fortunately, Scott’s Moots holds its own. The haze lifted just enough to let an orange sun bring out the depth in the titanium, and we made some magic.