The Radavist

Come along as we take a leisurely dive into the origin story of the 26+ Stridsland Beachcomber frame. Matias Stridsland has built a following around reviving old 26″ bikes and not taking things too seriously, but now he’s here to present his own 90s-inspired 26″ MTB.

Matias is self-admittedly addicted to the details and his chronicling of the process behind the Beachcomber gives real insight into the dedication that goes into these short-run projects. As he writes, this exact bike didn’t exist before and now it does—we think that’s pretty rad and if you’re interested in owning one, read to the bottom for pre-order details!

Wabi-sabi is an ancient and deeply-held Japanese philosophy that sees the beauty in imperfection, appreciates simplicity, and accepts that change is inevitable. This concept, if applicable to any bicycle, feels most appropriate for a custom, handmade, rigid singlespeed 29er mountain bike. Especially a Monē Bikes. That’s not a dig at all on Cjell’s abilities as a framebuilder but as he spelled it out in a text to Matt Mason, this bike’s owner and the co-founder of the Monumental Loop, “Gotta fuck it up… just a tiny bit.”

The Athens Divide is proof that you don’t have to lose a night of sleep to experience the full range of adventure racing. Billed as a “micro adventure,” this point-to-point race hosted by Donhou Bicycles takes riders over Athens’ urban ridgelines where, no matter the bike, everyone’s hiking somewhere. Read on for Tom Donhou’s recap of the first Athens Divide, with photos from Maliakos Nikos.

In Part One of her Cycling the World story, McKenzie Barney wrote about going all-in on bike touring after an introduction to unsupported two-wheeled travel in Vietnam led to a months-long ride down the length of Africa. In Part Two, she picks up the thread in recounting her solitary rides across New Zealand, Australia and South America.

As a trail worker, cyclist, and product developer at Schwalbe tires, Michael Rudolph knows better than most that heavy, and often sharp and pointy, tools don’t make for the most convenient bike cargo. And, coaster brake klunkers don’t often make the most capable cargo bikes. But, with the announcement of Leafcycles Custom Klunker Challenge, Michael was on a mission to reconcile these incompatibilities. Read on for the backstory and build process for his winning custom klunker submission: the Leafcycles Trail Digger.

After finishing the route up from Bulgan, I arrived in the largest city I’d come across in the entire trip outside of Ulaanbaatar. Yet, with a shade under 30,000 inhabitants, it’s not exactly a metropolis. Still, after so many days out in the middle of nowhere, it was nice to have a hot shower and a couple of restaurants to choose from. A serious upgrade from settling for boiling instant noodles in a hotel’s electric kettle in some of the smaller villages.

I intended to come here to visit the military guard post, which is responsible for issuing permits to reach the Altai Tavan-Bogd region at the border with China. In the past, one was allowed to simply use their satellite tracker as a means to be allowed entry or higher a guide on a horse right at the park entrance to obtain a permit, but since Covid, they changed the rules up and tourists could no longer go to the region without a local jeep tour guide straight from the city of Ölgii.

Being tailed by a jeep for a week in the countryside isn’t exactly my idea of a great time, so I started looking for alternatives to fill that gap in my route. A quick glance over some satellite maps showed a small cluster of snowy peaks that were only about 50km away as the crow flies, and there was a little white-checkered line crossing them on the map, so this seemed like a nice plan B, no chaperon required.

Over the years, I’ve had the ability and privilege of throwing my leg over a number of fat tire, drop bar touring bikes. From the almighty Tumbleweed Stargazer to the readily available Kona Sutra ULTD, these robust bikes with an off-road and load-bearing geometry make for great interstitial, genre-bending machines for all sorts of riding.

Yet before brands like Salsa were even making high clearance, drop bar, 29er, disc brake, production touring bikes, a brand called Singular Cycles in the UK shifted the paradigm with its Swift in 2007 and, later in 2008, Gryphon models. These frames featured high stack numbers, fit big tires, and most importantly, had rack/fender/cargo bosses aplenty.

This year, Singular debuted its custom Gryphon Titanium, and once again, I’m questioning which bike to crown “best in class.” Check out my full-length review below…

Unveiled at the 2022 Philly Bike Expo to much fanfare, the Alumalith is a realization of Ronnie Romance‘s dream to incorporate his favorite aspects of vintage mountain bikes into a deciededly modern offering. Featuring a non-suspension corrected Switchblade-style fork, rim brakes, sharp angulation, and 6061 aluminum fabricated by renowned craftsman Frank Wadelton–but with internal dropper routing, clearance for 27.5 x 2.6″ tires, and a contemporary approach to geometry–the Alumalith is nostalgic delight for riders of today. Josh picked up an Alumalith earlier this year and has spent months building it, riding, refining, and riding some more. Continue reading below for his review of this niche yet capable and fun machine…