The Radavist

When you ride a 44cm cyclocross bike, there aren’t many options out there. In fact, a lot of riders will opt for a 26″ mountain frame, which limits tire selections for ‘cross. For Lori, she wanted a cyclocross frame that would fit a fat tire and most importantly, fit her, while keeping true to the 700c wheel.

Builder Nao Tomii of Tomii Cycles wanted to take advantage of the extreme sloping top tube by making this cross bike look like a drop bar 29r mountain bike. Since a lot of people prefer their cross frames a bit smaller than their road frames, this one comes in a tad under 44cm. With 150mm Rotor cranks and Shimano Ultegra hydro disc brakes, Lori has absolute control over her bike. In fact, she’s already started riding trails on it here in Austin.

Personally, this is where custom frames triumph and when they look this good, who can argue with that? Check out this testimonial on Lori’s Instagram account.

Props to the mechanics at Mellow Johnny’s for building such a stellar rig for Lori and a huge high five goes to Nao at Tomii Cycles for building such a rad frame.

Ian Stowe is a shredmeister. A true Radavist. He races cross for Rock Lobster, works for Santa Cruz Bicycles and spends some time as a model for Giro (that’s him at the top of the site). This past weekend, while on a super super secret outing, I got to spend a lot of time in the saddle with the dude (Like, 25 miles of high Sierra uphill saddle time) and a lot of time looking at this stunning Rock Lobster disc cross bike.

I don’t know what’s better, the bike by itself, or the complete package, paired with those House Industries bidons… At any rate, check out more photos in the Gallery and stay tuned for more information on our outing last weekend.

John Slawta is as much an artist as he is a frame builder. It’s rare to see any one of his custom bikes from the late 80’s or early 90’s with the same paint job. Sure, he went on stints where he developed paint themes, but each Land Shark frame was truly unique. It’s for this reason that I’ve often found myself on a Land Shark kick, where I’ll scour ebay or Craigslist, hopeful of finding a bike that would fit me.

That’s how David, a Stumptown employee, found this bike in particular. Truthfully, he actually scored two bikes when he replied to a Craigslist ad in Los Angeles. This one in particular just happened to fit him a bit better. Turns out, this was Harrison Ford’s son’s bike. Oh SoCal…

Not needing an actual cyclocross racing bike, David converted it to more of a commuter. Since it lacks fender mounts, he has clip-on fenders that he’ll swap on and off depending on the unpredictable Portland weather. Wide, uncut riser bars and a 1x drivetrain, thanks to a Wolf Tooth, give this bike a rally-like feel as he zips around town going to and from various Stumptown locations.

Dedacciai Zero tubes offer a unique silhouette, especially for a cyclocross bike. Check out the bi-oval, shaped, top tube’s flat profile for shouldering and the downtube’s diameter as it butts into the bottom bracket shell. A true custom selection for a bike that, at the time, was a ripping race machine. Hell, it would still roast a cyclocross course. For now, it’s pretty content as a commuter and David is stoked. Win/win if you ask me.

Mo, or “Meaux”, Bruno Roy was at the 2015 Cyclocross Nationals here in Austin, where I shot her Mudhoney Pro cross bike. Then, with all the madness that ensued after the postponement of the main event, I totally blanked on posting the photos.

That is until the news yesterday that Mo had retired from professional cyclocross racing. While she won’t be hanging up cross racing all together, her days of UCI events have come to a close. Now, I’ve only met Mo once but she seems like the type of person who is riding bikes for the love of the sport. Her and her husband Matt were so kind and generous, I can’t see her disappearing from their local New England scene. What I’m saying is, I doubt this is the last time you’ll be seeing this bike!

For more news on Mo’s retirement, head over to VeloNews and for more photos of this slick, titanium and carbon Mudhoney Pro, check out the Gallery.

Moots have been making moves over the past year to redefine some of their lineup. Their Psychlo X got an overhaul and inspired the Routt, which then spawned the Routt 45 and while that might be exactly what you want, or need, they also offer custom designs.

This all-road is one of those custom designs and it features one hell of a build kit. That super tricked out ENVE GRD fork made its first appearance on this bike, as well as those new 12mm thru-axle King hubs (more to come on those). One other detail worth noting is the prototype ENVE seat post, with a double clamp mechanism – a vast improvement over the current design.

Overall, this was my favorite titanium bike at the show because it not only looks capable, it looks confident.

Shouts to Mike Cherney for making every. single. one. of those Moots head badges by hand!

Casey Sussman from Mars Cycles‘ work has been featured here on the site before. Coincidentally, it was during last year’s NAHBS that I bumped into him on the street and shot his track bike. This year, he had a booth in the “rookie” hall and brought this icy cross bike.

With paint by Jordan Low, leather work by Mark Christian Bolick of Suture Saddles and a mix of Columbus tubing, including a stainless downtube with stainless blades, Casey’s work really stood out in the hall. Maybe that’s what landed him the People’s Choice award?

For Mosaic Cycles, they don’t grind gravel, they just go on road rides. Roads that are mostly dirt, so when Aaron decided to make a bike for ‘all-road’ conditions, he didn’t have to change much, aside from tire clearances. He did however add a few braze-ons for versatility reasons. Fender and light rack mounts are the most obvious additions. This particular frameset includes the new Ethic Industries fork. The GS1 is offered both as a steel bike, built from True Temper S3 tubing, or a titanium frame, with a geometry slightly tweaked for off-road or all-road riding.

The GS1 is designed to ride better on those long days in the saddle on dirt. This is one bike that has intrigued me and I’ll be able to actually ride it in the near future as part of a long-term review. Stay tuned…

If you’re intrigued, holler at Mosaic, where they’ll be more than happy to answer your questions or build you a bike of your own.

This bike is a wedding gift for a woman named Sarah from her husband Josh, who coincidentally bought a Shamrock cross a few years back. Sarah and Josh met at a cross race, and there were exactly 585 days from the time they met, until the day they got married.

Individually painted paper airplanes each represent a day and you guessed it, there are 585 of them on the bike. Sarah wanted a bike that was a race machine during the season and a commuter the rest of the year. Throw some race wheels, swap out a few parts and you’ve got a bike ready for mud.

Max Lundbeck brought a rather unique bike to NAHBS this year. A cross bike for himself, this vibrant rig represents his Swedish heritage. His family has a tradition, a heritage box, which represents each male in their family that has had a son. This box dates back to 1797 and its latest entry is Max’s own son.

These names are painted on the seat tube and the frame itself is adorned in the Swedish flag’s colors. For the build itself, Max wanted a cross bike that he could commute on. Hence the fender stand-offs, eating up some of that extra clearance.

Campagnolo Chorus with a Shimano top pull, Brooks Cambium saddle and bar wrap, along with Ruffy Tuffy tires mean this race-ready rig will be rolling smooth year round.

Say, for argument’s sake, that you’re the owner of Henry James Bicycles, the main supplier of True Temper tubing, various lugs and tools. You know just about every framebuilder in the USA and have seen their work in great detail. So when it comes to select a builder to construct your dream bike, who do you call?

For Hank from Henry James, he looked to Santa Barbara’s Stinner Frameworks. When he found out about the beloved Mudfoot cyclocross bikes, he wanted in, but not being on the team, Aaron and painter Jordan Low designed Hank his own paint job.

Arguably my favorite from Low, this bike has pizzaz. With matte and glossy notes, a pearl top coat and yes, stripes with fades, Hank’s bike is a show stopper. SRAM Red 22, Chris King, ENVE and cyclocross tires with minimal tread will take on the fire roads, trails and tracks surrounding Henry James’ facilities in SoCal.

In fact, this bike looks so damn good, I might have to visit them to see it in the wild… If you’re at NAHBS, swing by the Henry James booth at #636 to see it in person.