The Radavist

Sklar Doggy has made some damn beautiful bicycles over the few years he’s been building in Bozeman, Montana. Yet, in recent months, he’s been jonesin’ to work with a new material. Steel is indeed, real, but Adam really wanted to work with titanium. A lot of builders have been making this transition as of late. In short, it offers their clients with a superior frame material and perhaps another draw is more profit for the builders. Or at least that’s what people think is the motivation.

After talking and shredding with Adam in the Angeles National Forest, where he got #ANFAF, Adam wax poetic’d all afternoon about how difficult titanium is to work with, stating it took him almost four times as long per frame. Right now, he’s got two frames under his belt, one for himself, and one for Colin, which is replacing Colin’s steel hardtail – consequently, he’s selling that frameset now. I was surprised to hear titanium was that much more difficult to work with, because I always assumed that the draw of the material was profit margins. Turns out, the experience of working with the material takes time and yeah, time is money…

For Adam, once he made a frame, he needed parts. Unfortunately, that meant scavenging parts from his NAHBS bike this year. You might notice the tight squeeze on the fork – all he had was a 27.5+ fork, not a 29+ fork. Run what you brung, indeed! For what it’s worth, these frames are designed to run a 27.5+ tire, or a 29 x 2.6″ – so it’s not exactly a “+” 29er.

While he’s already taken a few more orders on titanium frames, Adam is eager to master this material, resulting in a faster process and ultimately, making the best frame he can. I can’t wait to see where this new material takes Sklar Bikes and hopefully, I’ll get to ride one at some point. Thanks for hangin’, Adam! If you’d like a ti Sklar, holler at Adam!

2017 Philly Bike Expo: Stanridge Speed
Photos by Jarrod Bunk, Intro by John Watson and Words by Adam from Stanridge Speed

When modern builders utilize NOS tubing from the late 80’s, the results are more often than not, mind-blowing. Take this Stanridge Speed road bike from this year’s Philly Bike Expo. As soon as I saw it, I knew Adam had selected Gilco tubing (or is it?), yet there’s much more to the story, of which I’ll let Adam do the talking.

Adam, can you tell me about the Philly Bike Expo road bike? I’m suspecting there’s more than meets the eye here…

“I built the bike in conjunction with 7th and Park in Brownsville. It’s part of a larger project consisting of six available tubesets we’re making into frames. Three track and Three road. All the sets are NOS from the tail end of the golden era of steel in 1986. Most of the tubes are date coded. Columbus etched the iconic Dove and born on dates in the tubes in an effort to reduce false advertising by unscrupulous builders during this era. The story goes, builders in the 1980’s masked the imprinted doves on the tubing only to reveal the mark after the painting process.

How does this tubeset feel? Do you think it ever had the slightest idea these components would be hung from its bones… Ha. Too much time alone at the workbench I guess.”

Now that’s a story!

____

Follow Jarrod on Instagram, and Stanridge Speed on Instagram

2017 Philly Bike Expo: Peacock Groove Track Bike
Words and photos by Jarrod Bunk

Going into Philly Bike Expo I was looking forward to seeing what Eric Noren of Peacock Groove brought, especially since he brought the peoples choice bike last year. This S&S Coupled track bike, was on display having just been ridden to a second place at Madison Nationals by Tiana Johnson, did not let me down!

This bike featured a HED Jet 9 wheelset, one of Noren’s own Peacock Groove headsets and some of the wildest splatter paint, all finished off with Peacock Groove’s signature dropouts. There’s one thing for sure, the Liberace of bike builders didn’t let me down this year.

____

Follow Jarrod on Instagram, and Peacock Groove on Instagram

Rambling with the 333fab Air Land Sea
Photos and words by Morgan Taylor

Look at the surface of the 333fab Air Land Sea, and you’ll see a drop bar bike that fits bigger tires than most, amazing custom paint and graphics, and components that reflect the very best of what’s available. But dig a bit deeper and you find something that can really only be found in a custom bike, something that innovates and pushes the boundaries, something that’s truly special. The Air Land Sea draws you in. It asks you to look, not to rush, but to consider what a bike might be if there really were no rules. And, you can have one.

Is it one’s riding that evolves first? Or is it the bike that is the catalyst for evolution? Bicycle design, much like one’s riding style, evolves over time, triggered by a series of environmental or equipment changes. Perhaps your everyday singletrack just gets tiresome and you’re looking for a way to change it up, or maybe your road bike gathers dust during ‘cross season. At some point, riders look for excuses to shake things up, as a break from the painful monotony of riding bikes by the rules and luckily for us, the offerings from companies follow suit, evolving their lineup in the same sequence.

A number of brands have taken a look at their ‘cross bikes and asked what the next step in evolution would be, or perhaps, what it should be. What seems like ages ago, we were all riding singletrack and fire roads on 32mm tires, burnin’ brake pads as our cantilever or v-brakes smoked our sidewalls. Then came disc brakes, which offered more control, options for larger tires and other benefits. All the while, frame builders were experimenting with multiple wheel size options, brought along by the popularity of disc brakes. Soon 27.5″ (650b) wheels began popping up on drop bar ‘cross bikes, yet these weren’t really “cross” bikes anymore. They had evolved past that.

Ibis recently took a long hard look at their classic ‘cross frame, the Hakkalügi. These frames started out as steel, cantilever bikes, marked by classic Ibis stylings and most notably, the Mike Cherney fabricated “hand job” cable hanger. Like Ibis’ mountain bikes, once carbon fiber became the preferred material, the Hakkalügi went through the motions, too. Carbon canti, then carbon disc but the whole time, these bikes stayed true to classic ‘cross frame tire clearances and geometries, always feeling like outliers in the brand’s catalog. Ibis knew it was time for a change.

How a shop uses their retail floor and what they display there says a lot about their business model. I’ll go out on a limb here and say that most shops reserve the floor for items which are for sale and they’ll hang or display specialty, not-for-sale items outside of the consumable area. Well, that’s not the case at Cape Town, South Africa’s Woodstock Cycleworks. Nils and his team are literally swimming in bikes, both complete and in framesets. As we saw in our Shop Visit, the space is made by the bikes, not vice versa. Some shops’ spaces are made for the bikes. Here, you move throughout a myriad of frames, museum pieces and yes, items for sale.

After an initial walkthrough, two bikes that really resonated with me were these: a Hansom Track and a strange, BMX designed to incorporate a shovel. One is what many would consider a pristine example of a South African frame and the other, well, I dunno what it’s purpose is or was.

The BMX

Nils, or perhaps it was someone else, discovered this bike in a dumpster, outside a school. It seems it was a project of a student and aside from its obvious metaphor of working on bike trails with a shovel, it serves no current purpose at the shop, other than to cause inquiries by people like me.

Hansom Track R5000

Hansom is one of the most distinguishable South African builders and in his day as a builder, Gotty Hansom built a number of road and track bikes from Tange, Reynolds and Columbus tubing. This bike, in particular, was made from 531 and sports some very tight clearances. Currently, it’s listed on Woodstock’s for sale page…

A Matte Sand Breadwinner G-Road at Grinduro
Photos by Kyle Kelley, words by John Watson

For Grinduro this year, many framebuilders brought their baddest rigs out to get coated in the infamous Quincy dust. In the mix was Breadwinner Cycles from Portland and in tow was this very special version of the Limited Edtion G-Road, painted in Matte Sand and built with an emphasis on made in the USA componentry. This includes a kit based around the 27.5″ wheel and tire platform, perfect for packin’ in plenty of rubber to absorb the rough and rocky terrain, while relying on Chris King for the BB, HS and hubs, White Industries G30 Cranks, Velocity Cliffhanger rims in 27.5″, Thomson stem and seatpost, Paul Klamper brakes, Silca Impero Frame Pump and last but not least, trusty King Cages. Top off this stellar build with an Igleheart fork with cargo cage mounts and you’ve got one trusty and capable shred sled.

Bikes that look this good need very little introduction and at this point, everything Breadwinner has been putting out over the past few years has been enticingly shreddy! If you’re interested in one, holler at Breadwinner!

____

Follow Kyle on Instagram and Breadwinner Cycles on Instagram and look for more Grinduro coverage coming next week!

Size matters, at least when it comes to shops like this. One of my absolute favorite parts about traveling with a bicycle is visiting the local bike shop for whatever location is on my itinerary. During my recent trip to South Africa, I was delighted by their local shop, Woodstock Cycleworks. The first thing I noticed was the scale of this shop. It is massive, taking up half a city block, with giant, vaulted ceilings, exposed brick and wood trusses, with natural light so beautiful, any photographer would take great pleasure in shooting the interior.

Yes, those astute readers of this website will recognize this bike. Kyle photographed it at Grinduro Scotland already, along with the bikes of other builders. It was the only mountain bike in the bunch and it coincidentally won the People’s Choice award at Grinduro Scotland, which is why it’s here in California right now. Adeline makes Mercredi Bikes in the UK. Her torch time is usually spent on road and ‘cross bikes, but this mountain bike was her first, in terms of building and the first MTB she’s owned. A serious cyclocross racer, it didn’t take much for Adeline to adjust to racing this mountain bike at Grinduro, where she won. I’ve always been of the opinion that riding mountain bikes will enhance your ‘cross skills and she’s quickly finding that to be true.

Approaching one of Oakland’s industrial area warehouses I am stoked to take note of the impressive lineup of old Toyota pickups and a VW bus. Smith meets me at the gate and I am unsurprised that he is another very tall frame-builder. I have a sneaking suspicion many tall riders got sick of finding frames that fit them so they just started making their own. Anywho, Smith gives me a tour of the large building that is split into smaller studios for painting, ceramics, and glass work. The main area has many kilns and people working various glass projects. The yard is filled with pups lounging and a family gutting some old camping trailers to make them home.

Smith’s shop, RatKing, is quite humble, just enough room for a few tables to weld on, some shelving, and a mill. He keeps detailed notes of time spent on each frame to track his efficiency and still has many hand-drawn frame layouts up on the walls. Smith started pulling out some of his first frames and laying them next to a current batch of thru axel touring machines. If one thing sticks out on most of his frames it seems to be an affinity for very large head tubes, in diameter and length. Those massive 44mm head tubes lead to some really amazing custom fork work as well. The progression appears to have been quick from the first-built-but-never-ridden track frame to his current small lineup of custom frames. My first trip to his shop I caught a few frames in progress and pre-paint and was stoked to return a few weeks later to see the finished product.

I’ve long admired the work of Rick Hunter, yet have never been able to get ahold of one in my size. Especially since he has closed his order queue. My thoughts were, one day a frame would pop up in my size and I’d have to swoop on it. That’s what happened, in a nutshell, when I drove up to Chico, California to hang out with Paul Component Engineering for a few days. The trip coincided with the recent Paul Camp, a media gathering at the Paul shop, featuring eleven bikes, built by select framebuilders, all around a joint theme: a monster cross or mountain bike. Oh, and the bikes had to use the same color scheme: red, white and blue. As a group, these bikes were marvelous and I had a blast both riding and photographing them, especially this very frame…

Trail Working for the Trans-Cascadia and Oregon Timber Trail
Photos and words by Dylan VanWeelden

In Oregon, it is not uncommon to see two rolling waves moving with equal speed and swell in opposite directions. The Pacific is chaotic and tumultuous and the rocky beaches and moody weather facilitate this diversive behavior. But occasionally these waves move toward each other, combining and colliding with a massive, wild spike of energy — more beautiful and twice as tall as anything else on the horizon.

This is exactly the type of energy that came together last weekend in the mountain bike community. http://trans-cascadia.com/Trans-Cascadia (the 4-day blind format enduro race) and the newly founded Oregon Timber Trail (bikepacking trail going across Oregon) joined forces to create one hell of a trail building party. Over fifty cyclists, from top enduro racers to core bikepackers, shared rakes, saws, loppers, and endless Basecamp beers around the fire.

Nate from Monkey Wrench Cycles’ Hunter Commando Tourer
Photos by Kyle Kelley, words by John Watson

Nate and the entire Monkey Wrench Cycles gang have done a lot for US framebuilders over the years, as evident in their in-house museum where you can find vintage Moots MTBs, alongside Steve Potts’ creations, while a modern Hunter Cycles might be hanging out as well. The thing I can appreciate about what I’ve seen coming from MWC is all their bikes have the same modus operandi: fat tires, practicality and a stance that commands trail time. I mean, honestly, a vintage MTB is still an ideal touring bike and in a lot of ways, the bikes the MWC team are always building up are just “modern” vintage MTBs. Take for instance this Hunter Cycles from 2013 NAHBS in Denver.

Hello, my name is John and I’m a hardtail addict. I’m not sure when or where it began, but when framebuilders send me bikes to review, specifically hardtail mountain bikes, I tend to want to buy the framesets from them. Most recently, this Stinner Frameworks Tunnel 27.5+ bike, which I reviewed a little while back when it was built with Box Components and Magura products.

Coming from my stout and solid Retrotec, the Stinner offered a much lighter, zippier feel. It wasn’t necessarily a better ride, just a different one. One that I liked a lot, save for one major – to me at least – flaw: it only had one water bottle mount on the inside triangle.

Finding Friends on the Isle of Arran at Grinduro Scotland – Kyle Kelley
Words and photos by Kyle Kelley

You can read race reports all over the internet about Grinduro Scotland and that’s exactly why I’m not going to give you that here. It was Scotland, so of course, it rained! It was on the Isle of Arran, so of course, it was beautiful! It rained, so of course, it was muddy! And did I mention… it was Scotland, so of course, we drank whisky!