tag
I’m even surprised I had the time to walk around SxSW for an afternoon but I did anyway. Something about the shitshow that descends upon this sleepy little town is very alluring for a person who likes shooting photos. The freaks mix in with the locals and the homeless cope with it the best way they know how. I lost one roll of exposed film somehow, so you’ll have to make due with these…
Tools of the trade:
Mamiya 7ii / f4 80mm
Kodak Portra 400
Everyone that reads this website has had a moment in their life where cycling became something more than just pedaling around. They found a bike, or had a moment out riding that changed their perspective forever. For me, it was a mountain bike in college. Sure, I had bikes growing up, but they were always used for transportation, or hitting a kicker ramp and some trails once and a while. It wasn’t until college that I found something I vibed with. The trails became an exit from architecture school. I sucked and was slow but loved going fast and mostly avoiding the occasional wreck.
With all the SxSW madness engulfing the town, I’ve been hitting the roads in the morning and the trails late afternoon. All the while preparing for the Mission Workshop trip to Taiwan and China. There’s plenty of radness coming with that next week but for now, I’m just glad I had the time to ride.
Last week, before the SxSW shit storm settled in on Austin, I had some friends in town from New York. Wilis and Josh from King Kog wanted to get out on some trails, see the sites and eat some BBQ, so I arranged just that. For what felt like every single day, Wilis and I were out hitting my normal trail loops I’ve worked out, while still finding time to stop for some rope swing action.
We ended the week with some Austin BBQ and as the guys packed their bikes up in my living room, I could tell they were a little bummed to be leaving… Can you blame ’em?
Since this Recent Roll is almost 36 exposures, I narrated the photos.
Yashica t4
Pro 400H
Ok, ok. I’m playing hookie right now from the interwebs and am probably staring down the rear brake yolk on this beaut, ripping through the limestone and singletrack of Austin. There’s something to be said about a bike that’s usually seen from the rear during a race, which is what a lot of Wilis‘ race companions had the pleasure of admiring. Cross bikes aren’t meant to be dainty, precious objects that you wipe down every day. They’re meant to be dirty, muddy and fast.
Wilis showed up to Austin with his Rosko cross bike and it was too clean to shoot photos. We’ve been riding a lot, #corndogging and just having a blast hitting the local trails and hills. After a couple days of that, his bike looked good and happy, i.e. primed to shoot photos. I love Seth Rosko’s work and was very pumped on his grassroots support for King Kog during this year’s cross season. The team did well and the bikes did exceptionally well, even Wilis’ Campagnolo beast saw the podium on more than one occasion.
There’s something very metal about a black bike and this one’s got battle scars just about everywhere, save for the Cadence bar tape. Oh and the Pearl Velo bottle was my touch! We’re both fans of H.G. Wells.
Today I let Lauren test ride the Shinola Runwell I was sent to review. We rode out along the gravel trail down the street from our house to a park where during the summer, is always filled to capacity. In the dead of winter however, it was empty, even though we’re in shorts and t-shirts. Winter in Texas is funny like that.
I’ve got this bike for a while and I’ll do a more formal write up later this week but sometimes it’s nice to get someone else’s perspective.
This one’s a bit off topic but I really wanted to share it anyway. While I don’t see PiNP covering content of this nature frequently, I do like to share it from time to time.
Over the years, I’ve met some truly inspiring individuals, especially since moving to Austin. The affordable living, great weather and creative energy harbors some incredible talent (but don’t move here). One of these minds that I’ve gotten to know is Maura Ambrose. I watched her go from working on a farm (literally), to taking a leap into self-employment, ultimately making a name for herself and her company, Folk Fibers.
She works right in her East Austin home and is quickly outgrowing her available space. Her hand-stitched quilts and pillows use natural dyes, drawn from native flora but you’d swear the colors and vibrancy were synthetic. Check out a few photos in the Gallery and see the latest offerings from Folk Fibers here.
Leica M7
Zeiss 28mm f2.8 T* ZM / Leica 50mm f2 Summicron
Ilford 3200 delta / Fuji Neopan / Fuji PRO 400h
I’ve been wanting to shoot photos of Melissa and her Cinelli Bolt since this summer but never got the chance to. Earlier this week, my Mamiya 7ii came in the mail and I had to do a test roll, which is when I finally bumped into Melissa with a camera in hand. The photos came out great and although I can see a few things I’ll have to be mindful of (keeping those vertical lines straight, proper exposure with the meter, etc), I’m very pleased with the Mamiya 7ii. Even scanning medium format on my dinky Epson v600 produces great results (see above).
Pardon me while I talk under these photos of Melissa…
So why buy ANOTHER camera?
My loved one is away on business but this should make her homesick.
Photo by George Marshall
One of my favorite dudes in Austin, BMX legend / Fairdale mastermind, Taj Mihelich was interviewed by the Albion‘s George Marshall for the Rapha Wayfaring blog. How’s that for a link-heavy opener? Make sure you check this one out!
Over the past year, I’ve become a huge fan of Chelsea Wolfe and her dark, melodic folk music. Her previous two albums have been on heavy rotation and everyone I turn onto her, falls in love. Two weeks ago, I had the pleasure of seeing her perform live at the Central Presbyterian Church in Austin, one of the best venues in town for a show like this. That night, the church echoed with a powerful performance by Wolfe and her band.
Keep on top of her extensive touring here, pick up her music at your local shop or here and check out a few more photos below.
Leica M7
Zeiss 28mm f2.8 T* ZM
Ilford Delta 3200
I was riding down a fairly busy road coming back from the post office one day when I saw this hanging on a utility box. It’ wasn’t the first one that I’ve seen and sure wasn’t the last. Easy target, huh?
Hasselblad 500c/m
Zeiss 80mm T* CF
Fuji Provia 400x
These four photos were in one of my last Recent Rolls and while it’s not enough for a full Photoset, they make for a nice reminder to support and tip (beer!) your local bike mechanic. In this case, East Side Pedal Pushers.
Leica M7
Leica Summicron 50mm f2
Fuji Neopan 400
“I just wanted something simple and white.” That was Ryan’s reply when I mentioned how much I loved his Hufnagel road bike on our ride. I get a lot of people asking to go on rides here in Austin when they visit and I usually take them on a quick 20-30 mile route. The day starts out with “is that all we’re doing?” and ends with “holy shit, these climbs are steep!”. That’s what we did on Monday. 25 miles, 3,100′ of climbing.
Ryan’s Hufnagel is as far as I know, one of three in Texas. Jordan isn’t building bicycles anymore but he made a few for people in Texas when he was and they’re just as nice as his later bikes. With the signature seatstay treatment and his fondness for deep stays, the bikes just scream personality, without being too ostentatious. They’re just tastefully done. An elegant paint job and Campy 11 was exactly what Ryan requested: something simple and white.
This bike has been in the works for a while now and I’m not talking about the weeks the frame sat in the box while I accumulated the parts. I’m talking about since I first saw one in person, at Post Bikes in Brooklyn. The original Sword wasn’t what I would consider a true track geometry. It was more of a fixed cruiser, marketed not only at the kids wanting a street bike to thrash, but also to the older BMXrs who wanted a quicker way around town.
Steve and John Paul began working on the Sword SQ. They talked to various people in the “industry”, including Josh “Big Red” Hayes and Kyle Kelley, who worked on the Sword’s geometry, making it what it is today. This Sword SQ represents a lot of things to me. Mostly, a company, who in the wake of Taiwanese fabrication, still make their bikes in America, for an affordable price and have never taken a penny from an outside investor.
While I’ve already got a kick-ass track bike, this Sword will go through many variations. I’m already planning on putting a Cetma on it to carry my photo bag in the summer and will probably throw risers on it at some point to encourage some throwback FGFS. It’s a little small, compared to what I’m used to riding, so the saddle to bar drop is much more race-fit than my Icarus. I’ve dialed in the fit now and it looks a lot more reasonable than the first Instagram photo I posted.
I tried to use as many American companies as possible. Profile Fix / Fix hubs laced to H+Son Archetype rims (fucking love these rims!) and a 18t Phil Wood SLR cog. Thomson stem, post, 1960’s Unicanitor Saddle, Ritchey Classic Curve bars and Newbaum’s tape. I was tempted to buy a set of the Phil Wood cranks, but went with the tried and true SRAM Omniums with an extremely rare, purple 44RN 144#47 ring. My White Industries pedals got a new life and the Toshi single straps are just right. Finally, a black KMC Cool Chain and 28c Continental Gatorskins finish off the build, with a 3/4″ mini Viking decal on the stem.
I’m very happy with this bike and it’s been nice to ride a track bike around, since my Icarus’ fork has been at the painter’s for a few weeks.
Many thanks to FBM for this beast and I can assure you, this won’t be the last time you see it here on the site!
“Yeah, I’ve got a route planned, but we might dip off and take this one trail”. No matter how organized you try to make a friendly, chill ride, sometimes the best thing you can do is take that trail. Don’t get me wrong, sometimes you end up walking a hobo path over a twelve foot drop onto limestone but more often than not, you can make due.
Most of the trails here in Austin are very cross-bike friendly. Some are not, but we avoid those for the most part. People say, “get a MTB”, but they’re also the ones driving their cars to do a piece of 5 mile singletrack. You don’t want to ride a MTB out 15 miles on the road, then up a 18% sealed climb before you bomb down a scenic descent. But a cross bike…
When Kyle was in town, I pulled together a little ride with some friends. We spent about 40% of the time on sealed road and 50% on gravel, singletrack or dirt. That missing 10% was on this one “oh shit” hiking trail we poached on a piece of government land. We made it out alive, save for Chris flipping over his bars and one flat tire. John even rode a stock Nature Boy up some very steep faces. It was impressive.
Beers were had and stories were made. Bottom line is, we had a fucking blast and all lived to tell the tale / Instagram it but no Strava for this route. I wanna keep some of it a secret. We ended up doing +/- 40 miles and about 3,500′.
This is the second layout of the 2013 PiNP Calendar, entitled “Cross’n Town”. The camera, film used and location are located on the bottom left of the document.
On the first of each month, I’ll be posting a PDF file here on the site, allowing you to print this letter-sized document as you wish. Print as many copies as you’d like. Hand them out to friends or your local shop. It’s intended to be a free offering from the site, as a thank you to all the readers out there.
I don’t know about you, but January flew by for me. While most of you are still having to ride in inclement weather, I thought I’d share some Texas sun, if only as a reminder that Spring is almost here.
Enjoy!
Right Click and Save Link As – 2013 PiNP Calendar: February
While I try to ride everyday, it’s usually impossible. Believe it or not, it’s a lot of work to run this site but that’s why I’ve gotten in the habit of looking at riding as “coffee rides”. I usually kit up, hop on the cross bike and kick around on the local trails and roads, inevitably ending up at the best coffee bar in town, Frank for an Americano. The rides are never more than 20 miles or so and take about an hour and a half. Something even the busiest blogger can find time for.
When Kyle came to town last week (I already miss that little shit!), I took him on a coffee ride. We cross’d town and had a freaking blast, stopping at every jib spot we could find along the way until we got to the Hill of Life and the Greenbelt. Once there, we encountered a few falls, some sketchy, techy lines and a helmet-stealing dog. It was a lot of fun.
