The Radavist

Traveling overseas to race 360 kilometers in the midst of the demanding schedule of the Lifetime Grand Prix might not sound like the best strategy from a strict performance standpoint. Sarah Sturm writes about what else fed her motivation to line up for Europe’s most popular gravel race and why toeing the line at The Traka in Girona was, actually, exactly what she needed. Read on for Sarah’s reflections, a film by Benjamin Kraushaar and Dylan Stucki, and photos by Alex Roszko from her very long day.

We’re not in Kansas anymore. Certainly not. Unlike the hard bedrock of the flint hills and similar gravel roads that pattern the Midwest, The Mid South (or “Mud South”) hosted in Stillwater, Oklahoma is characterized by its rich red clay. Second only to race director Bobby Wintle‘s finish line hug for every rider, The Mid South has become infamous for its often wet weather that turns that beautiful red clay into drivetrain-eating mud. Re-routing the course is never even a topic of conversation.

Geographic locations and riding can add a lot to the picture when considering what your dream bike may be. Massive tire clearance? Tall or low bottom bracket? Slack or steep head tube angles. Well after riding in an area for so long you figure out what works, what doesn’t, and what you wish someone could just get right. With these thoughts in mind Bobby collaborated with Wilde Bikes to develop a bike that is Mid South approved. How so? Read on to find out a little bit more about this bike from Jarrod Bunk and check out some flicks on the red dirt.

It’s always great to get a chance to cross paths with internet acquaintances on the road and there are very few places like the Boyacá region of Colombia that enable that, thanks to Dean and Dang’s classic “Oh Boyacá!” route. I was heading north along the track while most are aimed southbound, which found me crossing with long and short-distance tourers on a daily basis while grinding up these infamous Colombian mountain passes. I spent some miles with two UK riders and, of course, we talked gear. Read on for a recap of our overnighter around the El Cocuy National Park and a closer look at Joe’s Mason Cycles RAW Andean Tourer.

Today we’re elated to present to you a most unique bicycle; Otis Guy’s 1978 Breezer Series I, in all its period-correct glory. This one is a very special installment of our Vintage Bicycles series, so let’s get to it!

Todd, from Black Cat Bicycles, has long been a favorite framebuilder of mine. A while back I did an Inside/Out Shop Visit with him in his home shop out of Aptos, California, and showcased a few of his bikes. I’ve also reviewed one of his Thunder Monkey hardtails. Something about his fillet-brazed and hand-carved lugged creations always resonated with me, even though I am usually attracted to tig-welded, more utilitarian “off-road” bikes. Truth be told: I’ve long wanted a Black Cat but wasn’t sure what to ask Todd to build for me.

Then it happened. As I was catching up with him at the 2022 Chris King Guest House event, I couldn’t stop drooling over the Swami 29er he had on display, so much so that I put a deposit down for one shortly after. So why buy a rigid mountain bike? I actually love riding rigid bikes on the same trails I ride my hardtails and full suspension bikes on. While I don’t take the same lines on my rigid bikes, I’m still relatively fast, or plenty fast enough, when descending a bike sans suspension.

For me, it’s all about being connected and honing skills. At this point, both reasons are tropes in bike reviews like this, right? Yet there’s something addicting to riding rigid bikes, and the Swami 29er has proven to be an incredible ally on our trails here in the Southern Rockies. Let’s check it out in detail below.

After an almost-decade long run, the Lost & Found Gravel Festival continues to provide adventurous-minded riders with dynamic and challenging terrain in northern California’s Lost Sierra Mountains. Registration for any of the event’s 100-mile, 60-mile and 35-mile courses goes directly to supporting the Sierra Buttes Trail Stewardship‘s Lost Sierra Route, a route that seeks to connect 15 mountain communities and foster economic prosperity through recreation. Billy Sinkford joined in for the mixed terrain fun this year and shares moments from the race along with photos of the Builders’ Bazaar.

The first weekend of June saw another lap around the sun for the Handmade Bicycle Show Australia and while there was no blowing out of the candles, the show turned five this year. This edition was once again hosted in the incredible Seaworks building in Williamstown. Overlooking the city skyline, Melbourne looks close enough that you could touch it. Massive shipping vessels bring goods into the port, making a spectacular backdrop for a celebration of the craft and culture of the Handmade Bicycle. Andy White of FYXO share a gallery of beautiful bicycles and backstory about the builders at this beloved event.

It’s a fun thought experiment to try to pinpoint when the decision to buy a hardtail might factor into someone’s cycling journey. Or, it is if you spend most of your time thinking about, designing, and building bikes like Nick Neuhaus and Daniel Yang of Neuhaus Metalworks. For me, the decision came about 18 months ago when I realized that the terrain that held the most appeal—for day rides and multi-day tours—was continually falling in the underbiking category when ridden on my drop bar gravel bikes. And even though I’m still very much cutting my teeth on more technical terrain, Nick and Daniel reached out to see if I’d be interested in reviewing their second steel hardtail design, the Hummingbird. Of course, I gladly accepted the chance to see if I could keep up with this handmade steel singletrack seeker. In addition to testing the bike on a variety of Colorado terrain, during the past three months I had multiple conversations with the Neuhaus guys about the current hardtail moment; how identity and marketing affect one’s perceptions of this somewhat black sheep trail category, and where the Hummingbird fits into this evolving conversation.

Wrapping up our coverage (for now) that showcases the celebrated work and career of San Diego-based framebuilder Rob Roberson, today we take a look at one of Rob’s most recent builds – a custom gravel bike for his friend and co-worker Jon Pucci. Rob and Jon worked together for years in Joe Bell‘s storied paint shop and conspired together for a chunk of that time planning what would become Jon’s dream bike and one he could adorn with an equally fitting paint job. As with all of Rob’s builds (and Jon’s paint, too), there’s a lot to take in so let’s get to it!

I knew nothing of the lore of gremlin bells when I signed on for Ozark Gravel DOOM, at the urging of a friend after a coveted spot opened in the sold-out 2023 event. The race had been on my radar for some time, though I was intimidated by its 390-mile, mostly dirt, route that starts and finishes at the iconic Oark General Store, in a small town by the same name, and traces the boundary of Arkansas’ Ozark St. Francis National Forest. Anything billed as a throwdown by one of the hardest riders around – route designer and event organizer, Andrew Onermaa – was sure to test my limits.

Founded in the college town of Tempe, AZ, State Bicycle Company started out selling affordable fixed-gear bikes and geared townies for college students and commuters. In their ten years of mostly direct-to-consumer bike business since, State has grown exponentially and now occupies a large warehouse/office in downtown Phoenix where they store and ship hundreds of bikes each month. While the brand still focuses on affordability and accessibility, its product offerings have expanded to include: lightweight road bikes, steel gravel bikes, coaster brake cruisers, electric bikes, apparel, and accessories. One bike in their lineup caught my attention a while back, the 4130 All-Road. Positioned as a versatile and well-equipped steel adventure bike, the 4130 fits 700c or 650b wheels with ample tire clearance, accepts drop or flat bars, boasts plenty of accessory mounts, and is designed around a comfortable geometry—for only $899!

In early 2022, State launched the 4130 All-Road with a SRAM Rival XPLR eTap AXS build kit for $1,999 and, if you were a prospective customer watching State’s website, you’d have noticed they sold out fast and have seen limited restocks. During that fleeting window of availability, I got my hands on one for this review and, over the past six months, have been logging long gravel rides, some singletrack shreds, and daily commutes. Continue reading for my thoughts on this capable machine…

A magnet for riders all over the world, the pull of the Baja Divide is strong. The promise of oceanside single-track, larger-than-life cacti and endless fish tacos calls people like a siren’s song to this small desert peninsula. At times, the route is backcountry heaven: a playground to wander and roam. At others, it’s a living hell: full of rutted roads and deep sandy tracks that push the physical and mental limits of even the most seasoned two-wheeled tourists.

With an official Facebook page, umpteen WhatsApp groups and countless trip reports ranging from FKT’s to first dates, there’s a tone of information already online. But amongst the endless tubeless chatter and hydration hysteria, there’s a distinct lack of information about the FOOD—until now. Sam Rice and Bec Norman share some tasty camp cooking tips from their trip down the peninsula…

While earning, or enduring, her Ph.D in Environmental Life Sciences, Courtney Currier began spending more time on the bike as a way to further connect to the places she was studying, and as a way to just spend time outside during the very inside days of the pandemic. In a very real sense, her time on the bike was inspiring and she began making art again. Building up and custom painting a unicorn fixed gear commuter brought everything full circle! Below, as she plans for what comes next in life post-Ph.D, Courtney reflects on bikes and joy, along with Tobias Feltus’ overview of the build process.

I don’t get new bikes very often these days. I’m pretty much a one-bike kinda guy. So, when the one complete bike I had in my possession (a Tumbleweed Prospector) got stranded in Nepal for an indefinite amount of time in March of 2020, I hit up Sean over at The Cub House to see what kind of bike I could get my hands on at the very beginning of the pandemic bike boom.  

I was looking for something versatile enough that would be fun for day rides on dirt roads, multi-use paths, and some singe-track. I was leaning toward a steel frame and wanted it to fit a healthy-sized 27.5” tire along with having all of the necessary accoutrements to mount up racks and bags just in case the need would arise. A SRAM 1x setup would be a nice bonus since I had some spare parts lying around. But most importantly, I wanted something that wouldn’t obliterate my bank account. After all, I didn’t know if I’d be back to my trusty T’weed in a matter of months.  

When looking at all of the options, the Surly Bridge Club seemed to tick more of those boxes than any other, and it turned out that I could get my grubby mitts on a size XL, so I went for it. What I didn’t realize at the time was that I’d end up spending more than two years riding and touring on the BC in Michigan, Turkey, Peru, and Colombia. It was never meant to be my full-time touring rig, but it just happened that way.

As riders prepare for the 2023 Tour Divide Grand Depart, Mitchell Connell reflects on his time riding a section of the Divide with Baker Donahue and Will Reynolds, who were headed north from Antelope Wells, NM to Banff, Alberta. In this clever piece, Mitchell intersperses his retelling of the trip with the riders’ “top five” responses to a variety of prompts and, in doing so, distills down the meaningful aspects of a lengthy bike tour. What top five questions would you ask?