tag
Without a doubt, there are no production frames like the Space Frame by Jones Bikes. These iconic bikes address all the needs of a modern tourer or singletrack bike with unique lines and most importantly, science to back their designs. Today, Jones announced the production SWB Titanium Space and Diamond Frames, in stock now. Check out the details and pricing information below.
Yes, you’re right. That ain’t gold. It’s anodizing. Drew from Engin Cycles is a master of the craft that is designing, engineering, and fabricating titanium bicycles. At this year’s Philly Bike Expo, Engin’s hardtails commanded attention with this one, in particular, bringing the bling. Its incredible anodization and design work was done by Jake Beadenkopf.
The build kit here includes the best of the best with SRAM AXS, RockShox Reverb dropper, Pike fork, and some beautiful Industry Nine wheels.
With such intricate masking and design work on a bike like this, one can only ask the question: “what will it look like dirty?!” If you’re the owner of this amazing Engin, please do us a favor and post some photos in the comments of how it looks with some dirt on it. I think I speak for everyone reading this when I say you have one stunning bike!
The Marauder from 44 Bikes is one hell of a versatile bike, available in steel and titanium, it blurs the line between shreddy MTB and bikepacking bike, sub out to a suspension fork and rip your local trails, or ride it rigid and pack on a few extra pounds of fun. Kris actually made all of the bags in-house, including the panniers, frame bag, and the stem sacks. It’s pretty rad to see a frame builder tackle some sewing in addition to wielding a torch. Running a Lupine Lights Pika in lieu of a dynamo allows Kris to run the same wheelset in shred mode as a full touring mode. He even made the rack and fork in house.
Kris built the bike with a mix of Shimano XTR 9100 and XT 8100 brakes, Industry Nine Wheels, a Fox Transfer dropper post and a Wolf Tooth Remote. This bikepacking bike swears to shred, that for sure!
FYXO sent over this video he made of the new Curve Cycling DownRock, a new titanium 29×2.6″ hardtail from the brand, with a plethora of details worth checking out at Curve.
Today we get an in-depth review of John’s titanium Sklar Bikes PBJ touring bike after its maiden tour in the Long Valley Caldera…
This year at Grinduro, eight frame builders presented bikes in partnership with Maxxis, Sram/Zipp, Columbus, and Hope Tech. The theme? What is your ideal Grinduro bike? For each gravel bike in the morning, we’ll present a mountain bike in the afternoon. This round, we’re matching the BTCHN’ gravel bike with this Sklar Rigid 29+.
Our friends down in Fairfield, Australia at Bastion Cycles pulled together a real treat for us. This “Fall Forest” themed Crossroad frame has been hand-painted to resemble an autumn forest, filled with leaves, flashing colors across the carbon and titanium frame. Read on for all the details and photos below.
During the ENVE Open House framebuilder exhibit, one builder traveled further than the others: Mark from Prova Cycles in Melbourne, Australia. I’d never seen a Prova in person. Instead, I’ve had to check out his work via the lens of FYXO and the Prova Instagram. Mark learned at the Bicycle Academy in the UK and has been really putting in work on his brand. Let me tell you. It shows.
ENVE has been supporting frame builders, both in the US and internationally for years now and has developed a symbiotic relationship with these artisans, who choose to put their forks, bars, and wheels on customer’s build kit lists. With this catalog of talent at their fingertips, they decided to have an Open House to celebrate not only their factory and offices in Ogden, Utah but the frame builders who choose ENVE to build out their complete bikes.
Over the next two mornings, we’ll look at a list of 20 frame builders’ bikes, in galleries filled with so many Beautiful Bicycles it’ll leave your mouth watering. Up first is Prova, Holland, Alchemy, Salt Air, Mosaic, Pursuit, English, Speedvagen, Bingham, and Allied.
Cane Creek Cycling Components and LaMere Cycles just announced the pre-order for their eeWings Titanium cranks optimized for modern fat bike hub and bottom bracket standards. The fatbike crank kit will come with a longer bottom bracket spindle to allow for optimal frame clearance and q-factor.
LaMere Cycles will be selling the eeWings fat bike cranks as an option on their complete bike models or aftermarket consumer-direct at a retail of $1049. Those interested in pre-ordering can do so now at Lamere Cycles with expected delivery in November. Check out more specifications below.
Ringing in a new era for Ribble Cycles is their HT TI titanium hardtail. With a 64° head angle and 150mm of travel up front, this 27.5 x 2.6″ hardtail is designed to compete in a world dominated by full suspension designs. Fully-built completes start at $2,815.06. See more at Ribble.
Thanks to Chumba, Industry Nine, Kogel Bearings, Wanderlust Gear and MRP, Alexandera is outfitted properly for a season of ultra-endurance racing this year. After an amazing DKXL story, she’s on her Stella Titanium in the throes of the Tour Divide. Perhaps you’ve recognized her in Spencer and Rue’s galleries? At any rate, Vince from Chumba sent over some photos of Alexandera’s bike, which you can check out below and please, if you have time, give her blog a visit and read her DKXL story. Personally, I can’t wait to read her Tour Divide tale!
Wow. We get a lot of emails from framebuilders, from all over the world, but rarely does something this interesting come across our inbox. Caminade is a French framebuilder and his latest project will melt your mind. The ChillEasy is a titanium full suspension mountain bike with a side-mounted rear shock, inspired by motos, which makes total sense since a lot of mountain bike technology has been adapted from motos over the years. Talk to Keith Bontrager about that one!
Check out more photos below and see the full spec sheet at Caminade.
Bike thieves suck. Colin got his last Sklar road bike stolen last year here in Los Angeles. It was one of those moments where we all dropped what we were doing and rode all over the neighborhood looking for it. While that event was less than ideal, the resulting bike is what is featured here on the Radavist today.
There’s a new all-road in town, from our Canadian friends at Knolly. The Cache is a 700c or 650b titanium drop bar bike that can take on anything you’re willing to throw at it. Knolly wrote a great development story at their site, showcasing the Cache and its abilities, so head on over and check that out.
Fenders, fenders, fenders! They’re important and when people put them at the forefront of their product design, they can look damn good. Case in point is the No22 Drifter X, which comes optionally with these new titanium fenders. The Drifter X is an all-road with slightly shorter stays, a higher stack, and the same construction and detailing that No22 is known for.
Check out some more photos below and all the nitty-gritty details at No22
Perhaps you recall Thomson making bikes with Lynskey a few years back? Those US made frames were a unique move for the component manufacturer and even though they didn’t sell a ton of the collaboration bikes, it set a precedent for the brand, prompting this project. Yesterday, I met Mike from Thomson, who was in town en route to NAHBS in Sacramento. Mike was unpacking and building up this flashy titanium bike when I saw the Thomson logo on the downtube. While it looks like a polished, finished product, this frame is, in fact, a working prototype. Not the first Thomson bike, but one of the first bikes Thomson has developed to be made overseas in Taiwan.
No cable bosses, no frame drillings for wires, nada. Just a Pure Road bike made from titanium. Why Cycles wanted to make a road frame, designed specifically for SRAM’s eTap AXS group, tripping it of bosses and focusing on the frame’s details and construction. With clearance for a 32mm tire, it’s a straight-up road machine. Head to Why Cycles for pricing and availability options.
