fizik has expanded its 3D-printed saddle offering with the introduction of the Aliante Adaptive, available in R1 ($299.99) and R3 ($259.00) models.
#3d-printing
tag
Radar
Radar Roundup: Ribble Gravel 725, Sam Hillborne Pre-Order, Rogue Panda Happy Jack Snack Sack, Mythos MTB Stem, 20th Annual Bicycle Quarterly, Restrap Solstice Century, NYC Velo and Alpine Luddites, and Making Marks
Our Radar Roundup compiles products and videos from the ‘net in an easy-to-digest format. Read on below for today’s findings…
Radar
Radar Roundup: Ukraine Aid, FRM Adventure Bike, Pretty Pretty Light, PNS x Pirelli, Rando Imperator, and It’s Always Sunny in Purbeck!
Our Radar Roundup compiles products and videos from the ‘net in an easy-to-digest format. Read on below for today’s findings…
Radar
Silca’s 3D Printed Mensola Computer Mount
3D printed titanium parts have ushered in a new wave of bicycle design and fabrication. From the UK’s Sturdy Cycles to Australia’s Prova Cycles and the US’ Firefly, each of these brands uses 3D printing technologies to make their bikes stronger, lighter weight, and more modern. Silca recently launched their Mensola Computer Mount, which retails at $175, and bolts directly to your stem’s faceplate.
Due to the 3D modeling and fabrication technologies, they could produce a number of designs by simply 3D modeling and printing them. This is the future of componentry design and yeah, it’s expensive, but it’s mostly just cool that it exists.
Radar
Fizik’s Antares Versus EVO 00 Adaptive
Hold onto yer butts!
Fizik utilizes new 3-d printing technologies on their new Antares Versus EVO 00 Adaptive and the result is the most unique saddle I’ve seen, yet it’ll cost you! The Adaptive saddle padding is crafted by Carbon 3D using its revolutionary Digital Light Synthesis technology.
“DLS is an additive manufacturing process that uses digital ultraviolet light projection, oxygen-permeable optics, and programmable liquid resins to produce parts with excellent mechanical properties, resolution and surface finish.”
Sounds high tech right? Well, it comes at a cost. 390.00€. See more at Fizik.
Reportage
Mark from Prova Cycles’ Ripido Prototype MTB, aka the ParTi Hardtail
During the ENVE Open House framebuilder exhibit, one builder traveled further than the others: Mark from Prova Cycles in Melbourne, Australia. I’d never seen a Prova in person. Instead, I’ve had to check out his work via the lens of FYXO and the Prova Instagram. Mark learned at the Bicycle Academy in the UK and has been really putting in work on his brand. Let me tell you. It shows.
Radar
Bastion Cycles Uses 3D Printed Titanium Lugs with Carbon Tubes
We’ve seen previous examples of using 3D printing to not only develop a bicycle frame, but inform its design. In my opinion using this technology to manufacture custom lugs which are then bonded to carbon tubing, resulting in a truly customizable geometry is one of the more practical uses, and that’s what Bastion Cycles is attempting to offer… Their website is up in its infancy, but there’s plenty of information to keep you engaged. Not to mention that clean disc road build!
Head over to Bastion Cycles to check out more.
