The Radavist

For framebuilders, there’s no better test for their product than a long bike tour. When I last saw Brian, he had just completed the Baja Divide on a bike he built. At the time, he had just left the outdoor industry and hoped to transition into building frames full-time under the Rare Earth Cycle Craft banner.

His hardtail was one of my favorite bikes I documented this year until I saw his Tour Divide bike…

 The hardtail market is far from saturated, yet there are a lot of bikes that just blend together with similar angles, colors, details, and pricing. This isn’t a bad thing, but when buying an incredibly well-rounded frame that can be built up any number of ways, you’d be hard-pressed to find anything in the same realm as a Monē.

The La Roca is Cjell Monē’s production hardtail, made by hand in a small operation in Taiwan using a unique fillet brazing technique. What you’re looking at now is the V3 frame, and we have yet to feature a La Roca V3 here on The Radavist so when Bailey was building this up at Sincere Cycles last Friday, I had to take it out for photos! Let’s check out what’s new in V3 and more details on Kevin from Adventure Bikepacking‘s build below!

Back in late 2018, I took delivery of a quirky steel full-suspension bike to review from a small framebuilding operation in the UK called Starling Cycles. Over the course of a few months, I rode the shit out of it in Los Angeles, where I was living at the time, and couldn’t get enough of it. As someone who lives metal bikes and loves riding trails, I hadn’t fully migrated to a full suspension chassis because I didn’t like the way the widely-available carbon models rode. The Murmur changed that for me. I reviewed the Murmur in April 2019 and immediately bought a V2 Murmur. 

Now living in Santa Fe, with arguably more technical terrain, I haven’t been able to put down the Starling Cycles Murmur; taking it high into the Sangre Mountains and beyond, this steel full-suspension bike really changed my perspective on the potential ride quality of full-suspension mountain bikes. Late last year, Joe from Starling reached out, saying he had a V3 frame for me to test out, and once again, I’ve been reaching for it nonstop.

Let’s look at my thoughts on the small changes the V3 underwent, leading to large improvements, and a broader perspective on steel full-suspension bikes below…

Today we are back with part two of Spencer Harding‘s ENVE Grodeo and Builder Round-up coverage. If you missed the builds featured in yesterday’s post, we’d recommend going back and giving them a gander—3D-printed parts (most ti but some steel, too!) seems to be the unofficial theme for the year but there’s plenty to see across the creative spectrum! Today, we finish up with the remaining frame builders in the showcase—with a few more overseas features—then we head out on the weekend’s main event, a 92-mile gravel ride on some of the best dirt in the northern Wasatch Mountains. Let’s dive in!  

Every summer, ENVE Composites hosts a massive open house at their HQ in Ogden, Utah with an accompanying gravel ride. The 2023 ENVE Grodeo, which went down just one week ago,  featured an impressive list of 24 frame builders from around the world. Spencer Harding was on the ground documenting all of the beautiful bicycles and riding festivities and, below, he presents Part One of his event recap with a stacked gallery of bikes, some snapshots from the builder ride, and Trackline time trail at the Grodeo. Let’s get to it!

We’ve looked back at the early works of Jeff Lindsay’s brand Mountain Goat before with John’s Whiskeytown Racer profile but today our focus is a wild creation from 1988; the Mountain Goat Dinoflage Deluxe. Writer Zap Espinoza shares the Mountain Goat origin story and an interview with Lindsay about his work at Mountain Goat—let’s get to it!

Petor Georgallou steals his sister away as a (reluctant) partner in crime to check out the Brother in the Wild Dorset, hosted by Brother Cycles. He’s pleased to find a “field full of weirdos” and a plethora of equally unique and odd bikes and, it turns out, everyone’s nice. Stick around near the end for a lengthy discussion on the merits and cost of silver brazing, and a sampling of the bikes that made an appearance.

We’re not in Kansas anymore. Certainly not. Unlike the hard bedrock of the flint hills and similar gravel roads that pattern the Midwest, The Mid South (or “Mud South”) hosted in Stillwater, Oklahoma is characterized by its rich red clay. Second only to race director Bobby Wintle‘s finish line hug for every rider, The Mid South has become infamous for its often wet weather that turns that beautiful red clay into drivetrain-eating mud. Re-routing the course is never even a topic of conversation.

Geographic locations and riding can add a lot to the picture when considering what your dream bike may be. Massive tire clearance? Tall or low bottom bracket? Slack or steep head tube angles. Well after riding in an area for so long you figure out what works, what doesn’t, and what you wish someone could just get right. With these thoughts in mind Bobby collaborated with Wilde Bikes to develop a bike that is Mid South approved. How so? Read on to find out a little bit more about this bike from Jarrod Bunk and check out some flicks on the red dirt.

It’s always great to get a chance to cross paths with internet acquaintances on the road and there are very few places like the Boyacá region of Colombia that enable that, thanks to Dean and Dang’s classic “Oh Boyacá!” route. I was heading north along the track while most are aimed southbound, which found me crossing with long and short-distance tourers on a daily basis while grinding up these infamous Colombian mountain passes. I spent some miles with two UK riders and, of course, we talked gear. Read on for a recap of our overnighter around the El Cocuy National Park and a closer look at Joe’s Mason Cycles RAW Andean Tourer.

Today we’re elated to present to you a most unique bicycle; Otis Guy’s 1978 Breezer Series I, in all its period-correct glory. This one is a very special installment of our Vintage Bicycles series, so let’s get to it!

Todd, from Black Cat Bicycles, has long been a favorite framebuilder of mine. A while back I did an Inside/Out Shop Visit with him in his home shop out of Aptos, California, and showcased a few of his bikes. I’ve also reviewed one of his Thunder Monkey hardtails. Something about his fillet-brazed and hand-carved lugged creations always resonated with me, even though I am usually attracted to tig-welded, more utilitarian “off-road” bikes. Truth be told: I’ve long wanted a Black Cat but wasn’t sure what to ask Todd to build for me.

Then it happened. As I was catching up with him at the 2022 Chris King Guest House event, I couldn’t stop drooling over the Swami 29er he had on display, so much so that I put a deposit down for one shortly after. So why buy a rigid mountain bike? I actually love riding rigid bikes on the same trails I ride my hardtails and full suspension bikes on. While I don’t take the same lines on my rigid bikes, I’m still relatively fast, or plenty fast enough, when descending a bike sans suspension.

For me, it’s all about being connected and honing skills. At this point, both reasons are tropes in bike reviews like this, right? Yet there’s something addicting to riding rigid bikes, and the Swami 29er has proven to be an incredible ally on our trails here in the Southern Rockies. Let’s check it out in detail below.

After an almost-decade long run, the Lost & Found Gravel Festival continues to provide adventurous-minded riders with dynamic and challenging terrain in northern California’s Lost Sierra Mountains. Registration for any of the event’s 100-mile, 60-mile and 35-mile courses goes directly to supporting the Sierra Buttes Trail Stewardship‘s Lost Sierra Route, a route that seeks to connect 15 mountain communities and foster economic prosperity through recreation. Billy Sinkford joined in for the mixed terrain fun this year and shares moments from the race along with photos of the Builders’ Bazaar.

Wrapping up our 2023 Handmade Bicycle Show Australia coverage that kicked off yesterday, Andy White is back with another packed gallery of thoroughly-documented beautiful bicycles. There’s a lot to look at, so let’s jump right in below!

The first weekend of June saw another lap around the sun for the Handmade Bicycle Show Australia and while there was no blowing out of the candles, the show turned five this year. This edition was once again hosted in the incredible Seaworks building in Williamstown. Overlooking the city skyline, Melbourne looks close enough that you could touch it. Massive shipping vessels bring goods into the port, making a spectacular backdrop for a celebration of the craft and culture of the Handmade Bicycle. Andy White of FYXO share a gallery of beautiful bicycles and backstory about the builders at this beloved event.

It’s a fun thought experiment to try to pinpoint when the decision to buy a hardtail might factor into someone’s cycling journey. Or, it is if you spend most of your time thinking about, designing, and building bikes like Nick Neuhaus and Daniel Yang of Neuhaus Metalworks. For me, the decision came about 18 months ago when I realized that the terrain that held the most appeal—for day rides and multi-day tours—was continually falling in the underbiking category when ridden on my drop bar gravel bikes. And even though I’m still very much cutting my teeth on more technical terrain, Nick and Daniel reached out to see if I’d be interested in reviewing their second steel hardtail design, the Hummingbird. Of course, I gladly accepted the chance to see if I could keep up with this handmade steel singletrack seeker. In addition to testing the bike on a variety of Colorado terrain, during the past three months I had multiple conversations with the Neuhaus guys about the current hardtail moment; how identity and marketing affect one’s perceptions of this somewhat black sheep trail category, and where the Hummingbird fits into this evolving conversation.