Whisky Parts Co: Spano Bars

Radar

Whisky Parts Co: Spano Bars

Whisky Parts Co’s newest carbon component is the Spano Bars, an all-road or gravel bar with multiple hand positions, a multi-stage flare, and flat tops. These bars feature a compound flare, measuring 12º at the hoods and 20º through the drops and are available in 40cm to 48cm widths. Check out more information at Whisky.

Whisky Parts Co: New Milhouse Carbon Moto and Winston Mustache Bars

Radar

Whisky Parts Co: New Milhouse Carbon Moto and Winston Mustache Bars

Whisky rolled out two new models of handlebars that surprised us! The Milhouse is a 825mm with carbon, moto-inspired bar with 8º upsweep, 16º backsweep, and the Winston is a 600mm wide carbon mustache bar with 73º backsweep. I’d say those bars fit right in within the Whisky lineup. What other bar shapes would you want to see?

Both of these bars are in stock now, so head to your local shop for ordering.

Whisky Parts Co. No.9 Monster Cross MCX Fork

Radar

Whisky Parts Co. No.9 Monster Cross MCX Fork

Whisky’s latest fork is their No.9 MCX “monster cross” fork which brings extra-wide tires, 700c x 51 mm or 650b x 61 mm (that’s 2.4”), to your corresponding frame. So how is this different than a MTB fork? Well, the MCX has a 415 mm axle-to-crown, minimizing the geometry effects. It’s also got 51 mm of offset, improving toe clearance with large tires or fenders. The MCX is within the Whisky CX fork family, with a 12 mm thru axle, and flat-mount brakes. There are also three-Pack mounts, dynamo cable routing, and fender mounts (700c x 45 mm tire clearance with fender) which add versatility for bikepacking and gravel riders.

MSRP $520.00

Whisky Parts Co: Boost MTB 29r Fork

Radar

Whisky Parts Co: Boost MTB 29r Fork

The newest fork to hit the shelves over at Whisky Parts Co will interest you 29r riders, particularly those who love the ride of a singlespeed rigid or just a rigid bike. The Boost MTB LT fork is 500mm long, clears a 3″ x 29″ or 27.5″ tire, has just the right amount of cargo cages, weighs 680g, uses IS disc mounts, and retails for $549.99. See more specs below and head to your local Whisky dealer for ordering!

Whisky Parts Co’s New Drop Bars

Radar

Whisky Parts Co’s New Drop Bars

For those of you looking into swapping out your drop bars for something new, Whisky Parts Co’s new offerings might be of interest to you. The new No.7 aluminum and No.9 carbon bars come in a variety of shapes, thanks to the 6, 12, and 24º flair options, as well as widths up to 46cm. With the two material options, there’s something for any build, so head to Whisky to check out the details and your local dealer for ordering.

Whisky Parts Co’s Private Stock: Ben’s Rock Lobster and Steve Potts

Reportage

Whisky Parts Co’s Private Stock: Ben’s Rock Lobster and Steve Potts

Whisky Part’s Private Stock: Ben’s Rock Lobster and Steve Potts
Photos by Kyle Kelley, words by John Watson

Private Stock. A term reserved the best of the best when it comes to distilling American whiskey, Scotch whisky, and bourbon. For Whisky Parts Co, a brand within the umbrella that is Quality Bicycle Products, their aim is to design the best parts possible and get the most people using those parts as possible. Part of that comes from OE sales and the other brands within QBP using Whisky Parts when it makes sense, yet there is a growing demand from Domestic and International frame builders, to create products specifically for niche market requests. We’ve seen Whisky do so with their road, cross and mountain forks, as well as their wheels and components over the years.

For Ben Witt, Whisky’s marketing and sales director, he felt the need to not only embrace the niche market of frame building, but to use the parts for two of his own bikes; a Rock Lobster all-road and Steve Potts dirt drop mtb. We’ve seen a number of Private Stock builds from the Whisky team here on the Radavist over the years, but these two are some of the best.

Thanks to Ben for taking the time to let us showcase these bikes and Kyle for the great photos! My fingers are cold just typing this up!

____

Follow Kyle on Instagram and follow Whisky on Instagram.

Whisky Parts Co: No. 7 Road Fork

Radar

Whisky Parts Co: No. 7 Road Fork

As we’ve seen on the new All-City Mr. Pink road bike, Whisky Parts Co have developed a carbon road fork for 1 1/8″ head tubes with integrated and hidden fender mounts, allowing you to either lighten up your existing road bike, or finally put that lonely frame in your garage to use. Best of all, in my opinion is the fork will clear 35mm tire on a 700c rim or 47mm tire on a 650b rim through utilizing a long reach caliper. The No7 fork has no rider weight limit, a 5 year Whisky warranty and is rated for ASTM Condition 2. Which translates to off-road riding and jumps less than 12″. The No7 retails for $399.99. See more details at Whisky and holler at your local bike shop for ordering.

Whisky Parts Co. Introduces the No.9 100w Carbon Fat Rim

Radar

Whisky Parts Co. Introduces the No.9 100w Carbon Fat Rim

Having a set of lighter, stiffer fatbike wheels really does make a huge difference in not only overall build weight, but ride quality. Whiskey Parts Co. introduce their new No.9 100w carbon fatbike rim, weighing in at 735g a piece, these new rims utilize a hookless sidewall and a Whisky-designed TBLS bead profile. This results in a stronger sidewall with more impact resistance. Retail is $649 a rim and the No.9 100w is in stock now at QBP. See more information at Whisky and full specs below.

Whisky Parts Surly Krampus MTB

Reportage

Whisky Parts Surly Krampus MTB

I love how you can take a frame that’s very accessible and affordable, strip it, then paint or powdercoat it. From there, you can either rebuild the stock kit, or build it up with choice components. For Matt at Whisky Parts, he did the latter.

Matt put a Whisky fork, bars on the front, a Whisky seatpost, Chromag stem, saddle, Industry Nine wheels, Middleburn cranks, HOPE pedals, Hope brakes and a Chris King bottom bracket. The all black component list just makes that gold powdercoat pop! I think this bike was my favorite at Frostbike and I gotta tell ya, it makes me want to do something rad with my Pugs…

See more in the Gallery!

Frostbike 2019: Three Shots of Whisky With a Carbon Back

Reportage

Frostbike 2019: Three Shots of Whisky With a Carbon Back

Frostbike 2019: Three Shots of Whisky With a Carbon Back
Photos and words by Jarrod Bunk

Whisky Components chose Quality Bicycle Products Frostbike to unveil some new products this year, and along with it, they proved that the sum of a well-appointed bicycle is in its parts.  With three unique builds designed around a Surly Wednesday, Surly Karate Monkey, and Surly Midnight special, all shod in a certain shade of retina burn that when entering the expo halls was sure to catch your eye.

There’s much more going on than at first glance, but the paint/carbon combo worked out really well, I’ve been told the Wednesday weighed under 27lbs.

____

Follow Whisky Parts Co on Instagram, and Jarrod on Instagram

The Whisky Six Select Frames – Jarrod Bunk

Reportage

The Whisky Six Select Frames – Jarrod Bunk

The Whisky Six Select Frames
Photos by Jarrod Bunk, words by John Watson


Photo via Whisky

Each year at Frostbike, Whisky builds bikes, both custom from frame builders and production from one of the QBP brands. This year Whisky had six builders and brands at the Frostbike booth to show off their new rims, bars and seatposts. Dubbed the Six Select, the collection debuted a variety of veritable dream bikes, including: Rock Lobster, 44 Bikes, Retrotec, Moth Attack, Salsa and Engin.

____

Follow Jarrod on Instagram.

Matt’s RetroFat SS with Whisky’s 70w Fat Tubeless Rims is Insane!

Radar

Matt’s RetroFat SS with Whisky’s 70w Fat Tubeless Rims is Insane!

Matt just fired over some photos of his 2009 NAHBS RetroTec Cycles RetroFat SS, retrofitted with the new Whisky 70w Fat Tubeless Rims to Industry Nine hubs… the consensus? I dig it, especially the color, the Cambium and those Surly Nate gumwall tires.

I think it looks like a ton of fun and if you’re going to Saddle Drive this year, you’ll probably see it mobbing around.

Check out a few more photos below!

Sincere Cycles Build: Kevin’s Monē La Roca V3 Hardtail 29er

Reportage

Sincere Cycles Build: Kevin’s Monē La Roca V3 Hardtail 29er

 The hardtail market is far from saturated, yet there are a lot of bikes that just blend together with similar angles, colors, details, and pricing. This isn’t a bad thing, but when buying an incredibly well-rounded frame that can be built up any number of ways, you’d be hard-pressed to find anything in the same realm as a Monē.

The La Roca is Cjell Monē’s production hardtail, made by hand in a small operation in Taiwan using a unique fillet brazing technique. What you’re looking at now is the V3 frame, and we have yet to feature a La Roca V3 here on The Radavist so when Bailey was building this up at Sincere Cycles last Friday, I had to take it out for photos! Let’s check out what’s new in V3 and more details on Kevin from Adventure Bikepacking‘s build below!